From: Chuck Church (cchurch@xxxxxxxxxxxx)
Date: Sun Apr 28 2002 - 18:37:33 GMT-3
Joe,
This command requires enable mode, I think. You won't have enable
mode on the lab's term server, so it's probably not an option.
Chuck Church
CCIE #8776, MCNE, MCSE
Sr. Network Engineer
Magnacom Technologies
140 N. Rt. 303
Valley Cottage, NY 10989
845-267-4000
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Joe Higgins
Sent: Saturday, April 27, 2002 6:05 PM
To: 'ccielab@groupstudy.com'
Subject: CCIE LAB: Is using the "send" message allowed?
Does anyone know if one is allowed to use the "send" message command on
the communication server in the ccie lab? I want to use the "send"
message command so that I can send a message that contains a command to
all attached routers simultaneously. This message would be for example
be a "ping x.x.x.x" or "write" or "show ip b sum", etc. This way I do
not have to go into every router to issue these commands. With all the
router windows open I can see the results. It works great on my home
lab.
Joe H.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:21 GMT-3