From: Jaspreet Bhatia (jasbhati@xxxxxxxxx)
Date: Fri Apr 26 2002 - 14:26:23 GMT-3
Gentlemen,
I kinda know how to redistribute between OSPF
and IGRP when IGRP has a smaller mask say /24 than OSPF say /29 . The way
to do this is to make a loopback interface with the same major net as OSPF
with a /24 mask and redistribute connected into IGRP using the connected
statement and a route-map for carefully controlling route redistribution
into IGRP . This works like a charm .....
Now here is my problem ........
How do I redistribute OSPF into IGRP when IGRP mask is /30 and OSPF mask
is /29 that is IGRP has a longer mask than OSPF . There is a way suggested
on CCO ( although it is against the most basic lab rule -- NO STATIC ROUTES
) . The CCO doc says that I can make a static route with mask of /30 (
ingress interface of IGRP ) and point it to either the next hop on the
OSPF network or an interface leading to that subnet on the OSPF network . I
tried this and this is leading to routes with inaccessible metric going
into the IGRP domain . NOT GOOD . Anyone can help me out of this problem
..... . Also I have secondary interfaces with Split horizon turned off on
teh IGRP side .....
Help Help Please .....
Jaspreet
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:20 GMT-3