From: hong tony (aamercado31@xxxxxxxxx)
Date: Thu Apr 25 2002 - 04:49:24 GMT-3
see below and watch the wrap
http://www.cisco.com/warp/customer/63/arch_4000.shtml#mem
--- Perminder Grewal <percy_gunner@hotmail.com> wrote:
> Hi
>
> I wonder if someone can help, I managed to obtain an
> old 4500-M router which
> had a duff processor. So I've taken the flash out
> and memory and decided to
> up grade my other 4500. However on boot up I get the
> following:
>
>
> Error: System flash sizing mismatch
> Size reported = 4096KB, calculated = 8192KB
>
>
> And then on show flash it registers the upgarde in
> Flash to '8192K bytes of
> processor board System flash (Device not
> programmable)'. The router is
> operational, but what does this mean '(Device not
> programmable)'. I want to
> up grade the to Enterprise +, however I don't want
> end up with a
> non-working router or having time to sort out a
> problem if occurs. I've
> checked on CCO with no answer. If anyone has
> encountered this problem before
> please let me know.
>
> Thanks
>
>
> Percy
>
> Below is the boot up process:
>
>
> System Bootstrap, Version 5.3(16) [richardd 16],
> RELEASE SOFTWARE (fc1)
> Copyright (c) 1996 by cisco Systems, Inc.
> C4500 processor with 32768 Kbytes of main memory
>
> program load complete, entry point: 0x80008000,
> size: 0x34cec0
>
> %Error: System flash sizing mismatch
> Size reported = 4096KB, calculated = 8192KB
>
> %SYS-4-CONFIG_NEWER: Configurations from version
> 11.2 may not be correctly
> under
> stood.program load complete, entry point:
> 0x80008000, size: 0x3a6634
> Self decompressing the image :
> #################################################
>
###############################################################################
#
>
###############################################################################
#
>
###############################################################################
#
> ################################ [OK]
>
> Restricted Rights Legend
>
> Use, duplication, or disclosure by the Government is
> subject to restrictions as set forth in subparagraph
> (c) of the Commercial Computer Software - Restricted
> Rights clause at FAR sec. 52.227-19 and subparagraph
> (c) (1) (ii) of the Rights in Technical Data and
> Computer
> Software clause at DFARS sec. 252.227-7013.
>
> cisco Systems, Inc.
> 170 West Tasman Drive
> San Jose, California 95134-1706
>
>
>
> Cisco Internetwork Operating System Software
> IOS (tm) 4500 Software (C4500-DS-M), Version
> 11.2(4)F1, RELEASE SOFTWARE
> (fc1)
> Copyright (c) 1986-1997 by cisco Systems, Inc.
> Compiled Thu 02-Oct-97 19:28 by kuong
> Image text-base: 0x600088A0, data-base: 0x60712000
>
>
> %Error: System flash sizing mismatch
> Size reported = 4096KB, calculated = 8192KB
> cisco 4700 (R4K) processor (revision F) with
> 32768K/16384K bytes of memory.
> Processor board ID 07292328
> R4700 processor, Implementation 33, Revision 1.0
> (Level 2 Cache)
> G.703/E1 software, Version 1.0.
> Bridging software.
> X.25 software, Version 3.0.0.
> 2 Ethernet/IEEE 802.3 interface(s)
> 1 Token Ring/IEEE 802.5 interface(s)
> 4 Serial network interface(s)
> 4294967292 terminal line(s)
> 128K bytes of non-volatile configuration memory.
> 8192K bytes of processor board System flash (Device
> not programmable)
> 4096K bytes of processor board Boot flash
> (Read/Write)
>
>
>
> Press RETURN to get started!
>
>
> %SYS-5-CONFIG_I: Configured from memory by console.
> %LINEPROTO-5-UPDOWN: Line protocol on Interface
> Ethernet0, changed state to
> up
> %LINEPROTO-5-UPDOWN: Line protocol on Interface
> Ethernet1, changed state to
> down
>
> %LINEPROTO-5-UPDOWN: Line protocol on Interface
> Loopback0, changed state to
> up
> %LINEPROTO-5-UPDOWN: Line protocol on Interface
> Serial0, changed state to
> down
> %LINEPROTO-5-UPDOWN: Line protocol on Interface
> Serial1, changed state to
> down
> %LINEPROTO-5-UPDOWN: Line protocol on Interface
> Serial2, changed state to
> down
> %LINEPROTO-5-UPDOWN: Line protocol on Interface
> Serial3, changed state to
> down
> %LINEPROTO-5-UPDOWN: Line protocol on Interface
> TokenRing0, changed state to
> dow
> n
> %LINK-3-UPDOWN: Interface Serial0, changed state to
> down
> %LINK-3-UPDOWN: Interface Serial1, changed state to
> down
> %LINK-3-UPDOWN: Interface Serial2, changed state to
> down
> %LINK-3-UPDOWN: Interface Serial3, changed state to
> down
> %LINK-3-UPDOWN: Interface Ethernet0, changed state
> to up
> %LINK-3-UPDOWN: Interface Ethernet1, changed state
> to up
> %LINK-5-CHANGED: Interface TokenRing0, changed state
> to initializing
> %TR-3-OPENFAIL: Unit 0, open failed: Lobe Test,
> failed
> %SYS-5-RESTART: System restarted --
> Cisco Internetwork Operating System Software
> IOS (tm) 4500 Software (C4500-DS-M), Version
> 11.2(4)F1, RELEASE SOFTWARE
> (fc1)
> Copyright (c) 1986-1997 by cisco Systems, Inc.
> Compiled Thu 02-Oct-97 19:28 by kuong.
> %LINK-3-UPDOWN: Interface TokenRing0, changed state
> to down
> %LINK-5-CHANGED: Interface TokenRing0, changed state
> to initializing
> R1#
>
> R1#sh flash
>
> System flash directory:
> File Length Name/status
> 1 3827536 c4500-ds-mz.112-4.F1.bin
> [3827600 bytes used, 4561008 available, 8388608
> total]
> 8192K bytes of processor board System flash (Device
> not programmable)
>
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:19 GMT-3