From: Brian Dennis (brian@xxxxxx)
Date: Wed Apr 24 2002 - 20:54:52 GMT-3
You might need to disable it if you have a firewall between the two
peers. DLSw+ uses UDP port 0 and if you're going through a firewall it
might cause problems trying to permit UDP port 0 through.
Brian Dennis, CCIE #2210 (R&S/ISP Dial)
bdennis@5g.net
5G Networks, Inc.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Lupi, Guy
Sent: Wednesday, April 24, 2002 4:01 PM
To: 'ccielab@groupstudy.com'
Subject: DLSW udp disable
I am wondering if anyone knows of a reason you would want to disable the
udp
unicast explorers in dlsw. I just want to make sure I am aware of a
situation where this would be needed. Thanks.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:19 GMT-3