From: Lileikis, Gary (gary.lileikis@xxxxxxxxxx)
Date: Wed Apr 24 2002 - 16:03:04 GMT-3
Stan,
Why would you need to use both demand-circuit and dialer-watch at the same
time?
Thanks,
Gary
-----Original Message-----
From: Zhang, Stan [mailto:stan.zhang@verizon.com]
Sent: Wednesday, April 24, 2002 2:35 PM
To: 'Babacar Diop'; cciegroup
Subject: RE: Ospf demand-circuit
Babacar,
1. You would use OSPF demand-circuit with dialer-watch in most instances.
2. You do not have to use an access-list to block the OSPF traffic if your
topology is stable. Watch out for routing loops within your topology,
that'll keep your Demand-circuit bouncing.
Stan Zhang
-----Original Message-----
From: Babacar Diop [mailto:babacard2000@yahoo.com]
Sent: Wednesday, April 24, 2002 1:54 PM
To: cciegroup
Subject: Ospf demand-circuit
Group,
Can anyone clarify this for me. Which is true, 1 or 2?
1)When doing ISDN backup wiht OSPF demand-circuit, do
you use it in conjunction with dialer-watch,
floating-static, backup interface or snapshot routing?
2)Do you use "ip ospf demand-circuit" only by itself
under the BRI. If so then you need then how do you
bring up the line since you have to deny ospf with an access-list to keep it
form bringing the line up.
Thanks for your input
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:18 GMT-3