From: Bauer, Rick (BAUERR@xxxxxxxxxxx)
Date: Mon Apr 22 2002 - 15:44:10 GMT-3
802.1Q encapsulation is now available on the built-in 10BaseT Ethernet
interfaces of the Cisco 2610, 2611, and 2612 with Cisco IOS software
12.2(2)T and subsequent releases. Although this feature has been available
on the Cisco 2600/3600 series since the release of Cisco IOS 12.1(5)T,
support was previously limited to Fast Ethernet interfaces only. 802.1Q is
not supported on any other Cisco 2600/3600 series 10BaseT Ethernet
interface. Table 1 shows the 2600/3600 series chassis and modules that
support 802.1Q:
Take a look at this document.
http://www.cisco.com/warp/public/cc/pd/rt/2600/prodlit/1726_pp.htm
-----Original Message-----
From: Jonghwan Hyon [mailto:jerry@datacraft-korea.com]
Sent: Monday, April 22, 2002 2:22 PM
To: chih_chung@hotmail.com
Cc: ccielab@groupstudy.com
Subject: Re: Cisco IOS Version for 2600 Ethernet Trunking
It is not support trunking on 10Mbps Ethernet interface!
it is at least need tokenring or fastethernet to use trunk on router!
----- Original Message -----
From: <chih_chung@hotmail.com>
To: <ccielab@groupstudy.com>
Sent: Tuesday, April 23, 2002 2:26 AM
Subject: Cisco IOS Version for 2600 Ethernet Trunking
> I tried to find it in the archive but couldn't find it. Does anyone know
> what version of IOS enables 2610 ethernet 10BaseT port to do trunking.
> Thank you very much.
> -John
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:16 GMT-3