From: Church, Chuck (cchurch@xxxxxxxx)
Date: Mon Apr 22 2002 - 15:41:14 GMT-3
John,
I believe we found you could do 802.1q trunking on a 10 meg 2600 if
you use a 'Plus' 12.0 or higher feature set. Watch the memory requirements
though:
iTennis01(config-if)#int e0/0.1
iTennis01(config-subif)#encap ?
dot1Q IEEE 802.1Q Virtual LAN
sde IEEE 802.10 Virtual LAN - Secure Data Exchange
Chuck Church
Sr. Network Engineer
CCIE #8776, MCNE, MCSE
US Tennis Association
70 W. Red Oak Lane
White Plains, NY 10604
914-696-7199
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
chih_chung@hotmail.com
Sent: Monday, April 22, 2002 1:27 PM
To: ccielab@groupstudy.com
Subject: Cisco IOS Version for 2600 Ethernet Trunking
I tried to find it in the archive but couldn't find it. Does anyone know
what version of IOS enables 2610 ethernet 10BaseT port to do trunking.
Thank you very much.
-John
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:16 GMT-3