From: yakout esmat (yesmat@xxxxxxxxxxxxxx)
Date: Mon Apr 22 2002 - 08:22:43 GMT-3
Louis,
You can do that by configuring SPAN on your CAt switch as follows:
set span <source port/source vlan> <destination port>
Example:
set span 3/21 9/48 (in this case you are monitoring traffic in/out of port
3/21)
or
set span 151 9/48 (here you are monitoring all of vlan 151)
The switch automatically mirror all packets in/out of the source port and
copies them into the destination port.
Of course you have to have a sniffer or switch probe plugged into port 9/48
to capture the traffic.
HTH
Ya
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Krucker, Louis
Sent: Monday, April 22, 2002 6:37 PM
To: 'ccielab@groupstudy.com'
Subject: Port monitoring on cat5K
Hi all,
I what set up port monitoring on Cat5K does somebody know how
configure it?
Thanks in advance.
Louis
Mit freundlichen Gr|ssen
Louis Krucker
sunrise
Network Support Engineer
Wireline Data
TDC Schweiz AG
Phone: +41 1 555 67 15
Mobile: +41 76 555 67 15
E-Mail: louis.krucker@sunrise.net
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:16 GMT-3