From: vess@xxxxxxxxxxx
Date: Fri Apr 19 2002 - 18:01:31 GMT-3
You are going to need to put in static NAT statements that map the
outside ip:port to the inside ip:port
Check out this link:
http://www.cisco.com/warp/public/556/9.html
vess
---- Original Message ----
From: jytszeto@hotmail.com
To: cdmurray@statestreet.com
Subject: Re: OT: Port Address Translation
Date: Fri, 19 Apr 2002 13:50:11 +0800
>Hi Christine,
>
>Thanks for your respones.
>
>I think that my bad english makes you misunderstand the question.
>I say it this way. My company's router has a public ip, say 1.1.1.1,
>and is
>connecting to the internal network 192.168.0.x/24. The internal
>network has
>3 different servers: ftp (192.168.0.1), telnet (192.168.0.2) and http
>(192.168.0.3).
>
>What I want to do is: If I ftp 1.1.1.1 from outside, eg my home,
>the router
>connect me to the ftp server. On the other way, if I telnet
>1.1.1.1, the
>router will then connect me to the telnet server.
>
>Can I do this with the router or I need other equipment?
>Thank you very much.
>
>Jeff
>
>----- Original Message -----
>From: <cdmurray@statestreet.com>
>To: Jeff Szeto <jytszeto@hotmail.com>
>Sent: Friday, April 19, 2002 1:32 PM
>Subject: Re: OT: Port Address Translation
>
>
>>
>> Jeff
>> Here's one way of doing it:
>> =========================================================
>> NAT sample
>>
>> ip nat pool TEST 192.180.253.66 192.180.253.66 netmask
>255.255.255.240
>> ip nat inside source list 10 pool TEST overload
>>
>> interface Ethernet0
>> ip address 169.191.10.89 255.255.255.240 secondary
>> ip address 192.180.253.65 255.255.255.240
>> ip nat inside
>>
>> interface Serial0
>> ip address 10.227.200.5 255.255.255.252
>> ip nat outside
>>
>> access-list 10 permit 169.191.10.0 0.0.0.255
>> ==============================================
>>
>>
>>
>> Regards,
>> Christine Murray
>> Ph: 612-93236124
>> cdmurray@statestreet.com
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:14 GMT-3