From: Babacar Diop (babacard2000@xxxxxxxxx)
Date: Fri Apr 19 2002 - 17:03:24 GMT-3
I am testing this config based on configuration
examples in NAM KEE's book. Are you telling me the
book is wrong because i am doing exactly what it says.
Thanks
--- Perminder Grewal <percy_gunner@hotmail.com> wrote:
>
> Your 'dialer-list 1 protocol llc2 permit' seems to
> be wrong, you should
> define ip as your interesting traffic. The LLC2 is
> wrong, the dlsw uses TCP
> as the encapsulated protocol running over IP. DlSW
> terminates the LLC2
> locally.
>
> Regards
>
> Percy
>
>
> >From: Babacar Diop <babacard2000@yahoo.com>
> >Reply-To: Babacar Diop <babacard2000@yahoo.com>
> >To: cciegroup <ccielab@groupstudy.com>
> >Subject: DLSw+ & DDR
> >Date: Fri, 19 Apr 2002 10:23:49 -0700 (PDT)
> >
> >Here is my config on two routers. When i pull the
> >serial interface cable of R5, the isdn circuit does
> >not come up. I am doing anything wrong?
> >
> >
> >For R5
> >
> >username r3 password 0 cisco
> >!
> >isdn switch-type basic-ni
> >!
> >!
> >!
> >!
> >source-bridge ring-group 100
> >dlsw local-peer peer-id 133.14.55.1 promiscuous
> >dlsw remote-peer 0 tcp 133.14.23.6
> >dlsw remote-peer 0 tcp 133.14.23.3 backup-peer
> >133.14.23.6
> >!
> >interface Loopback0
> > ip address 133.14.5.5 255.255.255.0
> > ip ospf network point-to-point
> >!
> >interface Serial0
> > backup delay 10 200
> > backup interface BRI0
> > no ip address
> > encapsulation frame-relay
> > frame-relay lmi-type ansi
> >!
> >interface Serial0.1 point-to-point
> > ip address 133.14.56.5 255.255.255.0
> > frame-relay interface-dlci 506
> >!
> >interface Serial0.2 multipoint
> > ip address 133.14.243.5 255.255.255.0
> > no ip split-horizon
> > ip ospf priority 100
> > frame-relay interface-dlci 503
> > frame-relay interface-dlci 504
> >!
> >interface TokenRing0
> > ip address 133.14.55.1 255.255.255.248
> > ring-speed 16
> > source-bridge 10 1 100
> >!
> >interface BRI0
> > ip address 133.14.35.5 255.255.255.252
> > encapsulation ppp
> > dialer idle-timeout 10
> > dialer map llc2 name r3 broadcast 8358664
> > dialer load-threshold 1 either
> > dialer-group 1
> > isdn switch-type basic-ni
> > isdn spid1 0835866101 8358661
> > isdn spid2 0835866301 8358663
> > ppp authentication chap
> > ppp multilink
> >!
> >router ospf 64
> > log-adjacency-changes
> > area 3 range 133.14.51.0 255.255.255.0
> > area 3 virtual-link 200.200.200.1
> > network 133.14.5.0 0.0.0.255 area 0
> > network 133.14.35.4 0.0.0.3 area 3
> > network 133.14.51.0 0.0.0.15 area 3
> > network 133.14.55.0 0.0.0.7 area 0
> > network 133.14.56.0 0.0.0.255 area 0
> > network 133.14.243.0 0.0.0.255 area 0
> > neighbor 133.14.243.4
> > neighbor 133.14.243.3
> >!
> >ip classless
> >ip http server
> >!
> >dialer-list 1 protocol llc2 permit
> >
> >For R3:
> >
> >hostname r3
> >!
> >!
> >username r5 password 0 cisco
> >!
> >!
> >!
> >!
> >ip subnet-zero
> >no ip domain-lookup
> >!
> >isdn switch-type basic-ni
> >!
> >!
> >!
> >!
> >dlsw local-peer peer-id 133.14.23.3 promiscuous
> >dlsw remote-peer 0 tcp 133.14.23.6
> >dlsw bridge-group 1
> >!
> >interface Loopback0
> > ip address 133.14.3.3 255.255.255.0
> > ip ospf network point-to-point
> >!
> >interface Ethernet0
> > ip address 133.14.23.3 255.255.255.0
> > bridge-group 1
> >!
> >interface Serial0
> > no ip address
> > encapsulation frame-relay
> > no fair-queue
> > frame-relay lmi-type ansi
> >!
> >interface Serial0.1 multipoint
> > ip address 133.14.243.3 255.255.255.0
> > ip ospf priority 0
> > frame-relay interface-dlci 305
> >!
> >!
> >interface BRI0
> > ip address 133.14.35.6 255.255.255.252
> > encapsulation ppp
> > dialer idle-timeout 10
> > dialer map llc2 name r5 broadcast
> > dialer load-threshold 1 either
> > dialer-group 1
> > isdn switch-type basic-ni
> > isdn spid1 0835866201 8358662
> > isdn spid2 0835866401 8358664
> > ppp authentication chap
> > ppp multilink
> >!
> >router ospf 64
> > log-adjacency-changes
> > network 133.14.35.4 0.0.0.3 area 3
> > network 133.14.243.0 0.0.0.255 area 0
> > distribute-list 1 out igrp 64
> >!
> >ip classless
> >ip http server
> >!
> >dialer-list 1 protocol llc2 permit
> >!
> >
> >Thanks for your help.
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:13 GMT-3