From: Perminder Grewal (percy_gunner@xxxxxxxxxxx)
Date: Fri Apr 19 2002 - 14:52:27 GMT-3
Your 'dialer-list 1 protocol llc2 permit' seems to be wrong, you should
define ip as your interesting traffic. The LLC2 is wrong, the dlsw uses TCP
as the encapsulated protocol running over IP. DlSW terminates the LLC2
locally.
Regards
Percy
>From: Babacar Diop <babacard2000@yahoo.com>
>Reply-To: Babacar Diop <babacard2000@yahoo.com>
>To: cciegroup <ccielab@groupstudy.com>
>Subject: DLSw+ & DDR
>Date: Fri, 19 Apr 2002 10:23:49 -0700 (PDT)
>
>Here is my config on two routers. When i pull the
>serial interface cable of R5, the isdn circuit does
>not come up. I am doing anything wrong?
>
>
>For R5
>
>username r3 password 0 cisco
>!
>isdn switch-type basic-ni
>!
>!
>!
>!
>source-bridge ring-group 100
>dlsw local-peer peer-id 133.14.55.1 promiscuous
>dlsw remote-peer 0 tcp 133.14.23.6
>dlsw remote-peer 0 tcp 133.14.23.3 backup-peer
>133.14.23.6
>!
>interface Loopback0
> ip address 133.14.5.5 255.255.255.0
> ip ospf network point-to-point
>!
>interface Serial0
> backup delay 10 200
> backup interface BRI0
> no ip address
> encapsulation frame-relay
> frame-relay lmi-type ansi
>!
>interface Serial0.1 point-to-point
> ip address 133.14.56.5 255.255.255.0
> frame-relay interface-dlci 506
>!
>interface Serial0.2 multipoint
> ip address 133.14.243.5 255.255.255.0
> no ip split-horizon
> ip ospf priority 100
> frame-relay interface-dlci 503
> frame-relay interface-dlci 504
>!
>interface TokenRing0
> ip address 133.14.55.1 255.255.255.248
> ring-speed 16
> source-bridge 10 1 100
>!
>interface BRI0
> ip address 133.14.35.5 255.255.255.252
> encapsulation ppp
> dialer idle-timeout 10
> dialer map llc2 name r3 broadcast 8358664
> dialer load-threshold 1 either
> dialer-group 1
> isdn switch-type basic-ni
> isdn spid1 0835866101 8358661
> isdn spid2 0835866301 8358663
> ppp authentication chap
> ppp multilink
>!
>router ospf 64
> log-adjacency-changes
> area 3 range 133.14.51.0 255.255.255.0
> area 3 virtual-link 200.200.200.1
> network 133.14.5.0 0.0.0.255 area 0
> network 133.14.35.4 0.0.0.3 area 3
> network 133.14.51.0 0.0.0.15 area 3
> network 133.14.55.0 0.0.0.7 area 0
> network 133.14.56.0 0.0.0.255 area 0
> network 133.14.243.0 0.0.0.255 area 0
> neighbor 133.14.243.4
> neighbor 133.14.243.3
>!
>ip classless
>ip http server
>!
>dialer-list 1 protocol llc2 permit
>
>For R3:
>
>hostname r3
>!
>!
>username r5 password 0 cisco
>!
>!
>!
>!
>ip subnet-zero
>no ip domain-lookup
>!
>isdn switch-type basic-ni
>!
>!
>!
>!
>dlsw local-peer peer-id 133.14.23.3 promiscuous
>dlsw remote-peer 0 tcp 133.14.23.6
>dlsw bridge-group 1
>!
>interface Loopback0
> ip address 133.14.3.3 255.255.255.0
> ip ospf network point-to-point
>!
>interface Ethernet0
> ip address 133.14.23.3 255.255.255.0
> bridge-group 1
>!
>interface Serial0
> no ip address
> encapsulation frame-relay
> no fair-queue
> frame-relay lmi-type ansi
>!
>interface Serial0.1 multipoint
> ip address 133.14.243.3 255.255.255.0
> ip ospf priority 0
> frame-relay interface-dlci 305
>!
>!
>interface BRI0
> ip address 133.14.35.6 255.255.255.252
> encapsulation ppp
> dialer idle-timeout 10
> dialer map llc2 name r5 broadcast
> dialer load-threshold 1 either
> dialer-group 1
> isdn switch-type basic-ni
> isdn spid1 0835866201 8358662
> isdn spid2 0835866401 8358664
> ppp authentication chap
> ppp multilink
>!
>router ospf 64
> log-adjacency-changes
> network 133.14.35.4 0.0.0.3 area 3
> network 133.14.243.0 0.0.0.255 area 0
> distribute-list 1 out igrp 64
>!
>ip classless
>ip http server
>!
>dialer-list 1 protocol llc2 permit
>!
>
>Thanks for your help.
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:13 GMT-3