From: DAN DORTON (DHSTS68@xxxxxxxxxxxxxxx)
Date: Wed Apr 17 2002 - 17:30:40 GMT-3
rip summary-address only works for RIP Version 2 & when split horizon is disabl
ed on the interface.
Snip>
Autosummary will override the configured summary-address feature on a given int
erface except when both of the following conditions are true:
The configured interface summary-address and the IP address of the configured i
nterface share the same major network (the classful, nonsubnetted portion of th
e IP address).
Split horizon is not enabled on the interface.
-------------------------------------------------------------------------------
-
Note If split horizon is enabled, neither an autosummary address nor the int
erface summary-address is advertised.
http://127.0.0.1:8080/cc/td/doc/product/software/ios121/121cgcr/ip_c/ipcprt2/1c
drip.htm#xtocid164669
>>> "Alex Paulino" <Alex@2s.com.br> 04/17/02 02:57PM >>>
Hi guys, my environment is:
OSPF DOmain ----- S1 | R1 | Eth0 ------lan ----------eth1 | R2_backone_RIP_Ro
uter
R1:
interface s1
ip address 138.1.26.1 255.255.255.0
encap frame-relay....
...
!
Interface eth0
ip add 155.100.1.1 255.255.255.240
ip summary-address rip 138.1.0.0 255.255.255.240
!
Router Rip
network 155.100.0.0
no auto-summary
The problem is: the summary address for the major network in OSPF domain does
n't appear in the R2 RIP table, Does what may it to be wrong?
R2 rip routing is in default configuration....
thanks
Alex
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:11 GMT-3