From: Stephen C. Feldberg (scfeldberg@xxxxxxxxxxx)
Date: Wed Apr 17 2002 - 17:22:58 GMT-3
I believe that the 138.1.0.0 network would already need to be in the RIP
process for the "ip summary-address rip 138.1.0.0 255.255.255.240" command
to work. Try "redistributing connected" into RIP with a route-map that only
permits the 138.1.0.0 network.
Steve
----- Original Message -----
From: "Alex Paulino" <Alex@2s.com.br>
To: <ccielab@groupstudy.com>
Sent: Wednesday, April 17, 2002 3:57 PM
Subject: RIP summary question
> Hi guys, my environment is:
>
> OSPF DOmain ----- S1 | R1 | Eth0 ------lan ----------eth1 |
R2_backone_RIP_Router
>
> R1:
> interface s1
> ip address 138.1.26.1 255.255.255.0
> encap frame-relay....
> ...
> !
> Interface eth0
> ip add 155.100.1.1 255.255.255.240
> ip summary-address rip 138.1.0.0 255.255.255.240
> !
> Router Rip
> network 155.100.0.0
> no auto-summary
>
> The problem is: the summary address for the major network in OSPF domain
doesn't appear in the R2 RIP table, Does what may it to be wrong?
>
> R2 rip routing is in default configuration....
>
> thanks
>
> Alex
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:11 GMT-3