From: Ali (muali_cisco@xxxxxxxxxxx)
Date: Mon Apr 15 2002 - 18:56:34 GMT-3
Send the output of show isdn status and your ISDN Configs..
Ali
----- Original Message -----
From: "Jeffery S Kimes" <kimes@us.ibm.com>
To: "Jaspreet Bhatia" <jasbhati@cisco.com>
Cc: <ccielab@groupstudy.com>; <nobody@groupstudy.com>
Sent: Monday, April 15, 2002 2:25 PM
Subject: Re: Second BRI channel does not come up
> Let's look at the config of the dialing router.
>
> I would pay particular attention to see if you had two dialer maps...
>
>
>
>
> Jaspreet Bhatia
> <jasbhati@cisco.c To:
ccielab@groupstudy.com
> om> cc:
> Sent by: Subject: Second BRI
channel does not come up
> nobody@groupstudy
> .com
>
>
> 04/15/2002 01:59
> PM
> Please respond to
> Jaspreet Bhatia
>
>
>
>
>
> Guys,
> I have never been able to get my second BRI channel up
> and running .Here is what I am doing
> 1) dialer load-threshold 1 either
>
> 2) encap ppp
>
> 3) ppp auth chap
>
> 4) ppp multilink
>
> 5) Gave two spids and two LDN's
>
>
> I am running the BRI circuit between two 3600 routers running on 12.1
> code Enterprise .
>
> Am I missing something here ?
>
> TIA
>
> Jaspreet
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:08 GMT-3