From: D. J. Jones (meganac@xxxxxxxxx)
Date: Sun Apr 14 2002 - 14:02:08 GMT-3
Maybe this will help you.
http://www.cisco.com/warp/public/cc/pd/ibsw/ibdlsw/tech/dls5_rg.htm
..dj
----- Original Message -----
From: "Larson, Chris (Contractor)" <Chris.Larson@ed.gov>
To: <ccielab@groupstudy.com>
Sent: Friday, April 12, 2002 8:53 AM
Subject: DLSW priority.
> I had a question about DLSW priority. I have been unable to find anything
on
> CCO that gives a complete picture. All the docs simply say DLSW uses these
> ports for high, medium, normal, low traffic.
>
> When I do a DLSW priority, it seems dlsw decides what traffic is high
> medium normal and low on it's own and then transmits on that port yes? I
> would still need to do some type of priority queuing or custom queueing
> based on the ports DLSW uses to actual get this to work on the interface
> right? If I did not, that traffic actually wouldn't be prioritized at all
> and would be transmitted just the same as if I didn't use the priority
> argument, except that all of it would use port 2065.
>
> Does that make sense, and is that correct?
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:07 GMT-3