From: Kathleen Burns (beta311@xxxxxxx)
Date: Sat Apr 13 2002 - 15:33:34 GMT-3
I believe this is due to load threshold you have set. Your first line dials
and connects, then your load-threshold kicks in and brings up the other
line. After the idle time out the first line drop but the second line is
still up, so the load threshold kicks in again. Try changing your
load-threshold to 2 and that should be enough of a delay to drop both
lines...
Bill
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Mingzhou Nie
Sent: Friday, April 12, 2002 10:15 PM
To: ccielab@groupstudy.com
Subject: dialer watch with dialer load-threshold
This is interesting. I'm configuring dialer watch on dialer profile.
2503a is calling 4500a. If I enter "dialer load-threshold 1 either" in
interface dialer0, even after serial interfaces come back, r1 keeps
bringing up isdn link. If I took it out, isdn link becomes idle at next
idle time out. Why is that?
Mingzhou Nie
1w6d: %DIALER-6-UNBIND: Interface BR0:1 unbound from profile Di0
1w6d: %ISDN-6-DISCONNECT: Interface BRI0:1 disconnected from 94724811
, call ls
1w6d: %LINK-3-UPDOWN: Interface BRI0:1, changed state to down
1w6d: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0:1, changed
state to n
1w6d: %LINK-3-UPDOWN: Interface BRI0:1, changed state to up
1w6d: %DIALER-6-BIND: Interface BR0:1 bound to profile Di0
1w6d: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0:1, changed
state to p
1w6d: %ISDN-6-CONNECT: Interface BRI0:1 is now connected to 94724811
1w6d: %DIALER-6-UNBIND: Interface BR0:2 unbound from profile Di0
1w6d: %ISDN-6-DISCONNECT: Interface BRI0:2 disconnected from 94724811
, call ls
1w6d: %LINK-3-UPDOWN: Interface BRI0:2, changed state to down
1w6d: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0:2, changed
state to n
1w6d: %LINK-3-UPDOWN: Interface BRI0:2, changed state to up
1w6d: %DIALER-6-BIND: Interface BR0:2 bound to profile Di0
1w6d: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0:2, changed
state to p
1w6d: %ISDN-6-CONNECT: Interface BRI0:2 is now connected to 94724811
=====
- | |
:|||: :|||:
:|||||||: :|||||||:
.:|||||||||||:.:|||||||||||:.
C i s c o S y s t e m s
www.cisco.com/tac
Empowering the Internet Generation
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:07 GMT-3