From: Jon O'Nan (jononan@xxxxxxxxxxxxxxx)
Date: Thu Apr 11 2002 - 17:11:35 GMT-3
Tried it...
r1#xi bri
Interface IPX Network Encapsulation Status IPX
State
Ethernet0 100 SNAP up [up]
Serial0 unassigned not config'd administratively down n/a
Serial1 unassigned not config'd up n/a
r1#
r1#
r1#
r1#
4d04h: IPXRIP: positing full update to 100.ffff.ffff.ffff via Ethernet0
(broadcast)
4d04h: -Traceback= 36CAA3A 36BEDA8 36C937C 36C9534
4d04h: IPX: Sched upd for Et0 (RIP)(FULL): gap = 55, holddown = 5
4d04h: IPXRIP: Update for Ethernet0:100 (FULL)(RESET PH)
4d04h: ?: 100 via 100:Et0 (FULL:BCAST) (SHRZ) NO
4d04h: IPXRIP: suppressing null update to 100.ffff.ffff.ffff (Ethernet0),
sent 0 packet(s)(IDLE)
4d04h: IPXSAP: positing update to 100.ffff.ffff.ffff via Ethernet0
(broadcast) (full)
4d04h: -Traceback= 36CA634 36BEE52 36C93F2 36C9534
4d04h: IPX: Sched upd for Et0 (SAP)(FULL) (NONE)
4d04h: IPXRIP: positing full update to 100.ffff.ffff.ffff via Ethernet0
(broadcast)
4d04h: -Traceback= 36CAA3A 36BEDA8 36C937C 36C9534
4d04h: IPX: Sched upd for Et0 (RIP)(FULL): gap = 55, holddown = 5
4d04h: IPXRIP: Update for Ethernet0:100 (FULL)(RESET PH)
4d04h: ?: 100 via 100:Et0 (FULL:BCAST) (SHRZ) NO
4d04h: IPXRIP: suppressing null update to 100.ffff.ffff.ffff (Ethernet0),
sent 0 packet(s)(IDLE)
4d04h: IPXSAP: positing update to 100.ffff.ffff.ffff via Ethernet0
(broadcast) (full)
4d04h: -Traceback= 36CA634 36BEE52 36C93F2 36C9534
4d04h: IPX: Sched upd for Et0 (SAP)(FULL) (NONE)
----------------------------------------------------------------------------
----------------------------
r2#xi brie
Interface IPX Network Encapsulation Status IPX
State
Ethernet0 2000 NOVELL-ETHER up [up]
Serial0 unassigned not config'd administratively down n/a
Serial1 unassigned not config'd up n/a
TokenRing0 unassigned not config'd administratively down n/a
r2#
----- Original Message -----
From: "Lupi, Guy" <Guy.Lupi@eurekaggn.com>
To: "'MADMAN'" <dmadlan@qwest.com>; "Jon O'Nan" <jononan@columbus.rr.com>
Cc: <ccielab@groupstudy.com>
Sent: Thursday, April 11, 2002 3:59 PM
Subject: RE: IPX Question
> Does this also work for encapsulation mismatches? I can't test it right
> now, thanks.
>
> -----Original Message-----
> From: MADMAN [mailto:dmadlan@qwest.com]
> Sent: Thursday, April 11, 2002 3:48 PM
> To: Jon O'Nan
> Cc: ccielab@groupstudy.com
> Subject: Re: IPX Question
>
>
> Give the interface an IPX network number and then debug IPX. You
> should see the conflict.
>
> Dave
>
> Jon O'Nan wrote:
> >
> > If I had a router connected to an IPX network and did not know the
> > network number. How would I discover the network on my router?
> >
> > Help Please!!!
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:05 GMT-3