From: Williams, Glenn (WILLIAMSG@xxxxxxxxxxxxx)
Date: Thu Apr 11 2002 - 12:35:00 GMT-3
Where I got this is a diagram showing the topology of Network force proposed
2nd simulation lab. That is how they had it laid out. So yes just a see if
it is possible. Maybe a typo on their diagram.
GW
-----Original Message-----
From: MADMAN [mailto:dmadlan@qwest.com]
Sent: Thursday, April 11, 2002 10:32 AM
To: Williams, Glenn
Cc: 'ccielab@groupstudy.com'
Subject: Re: Duplicate DLCIs
Can't do that and the whining router tells you exactly why. I assume
your just playing and this is not something you really want to
implement.
Dave
"Williams, Glenn" wrote:
>
> Want to know if this can be done.
>
> R1 ---(F/R)-----R2 -------(F/R)-------R3
>
> R2 is hub. I want point to multipoint for a IPX network. All frame
> connections using same IPX network, say IPX network 123. But I also want
> two individual point-to-point IP networks. We will say 12.0.0.0 network
> from R1 to R2 and 23.0.0.0 from R2 to R3.
>
> I can not create the DLCIs to do this because I get an error that says
DLCI
> already exists when I have already mapped it for IPX and want to map it
> again under new sub interface for IP. I tried putting a secondary IP
> address under the multipoint, but doesn't ping too well.
>
> Any ideas or won't this work? Obviously there is something I don't
> understand about frame relay.
>
> GW
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:05 GMT-3