From: Tu Nguyen (tunguyen@xxxxxxxxxxx)
Date: Wed Apr 10 2002 - 22:10:52 GMT-3
Hi,
Thanks everyone for the prompt responded, apparently the only way out is
by upgrading the IOS to the later rev. I will probably do the hardware
upgrade prior to downloading the IOS. My other alternative is probably
using cyclades. It support both telnet and sshd, and no limitation on
telnet connections. http://www.cyclades.com
Thanks once again.
Tu Nguyen
JNCIE#51, CCNP, CCDP, CCSA, CCSE, MCSE
Sr. Network Engineer
Juniper Networks
1184 N Mathilda Avenue
Sunnyvale, CA 94089
Email: tunguyen@juniper.net
-----Original Message-----
From: Spio Wagus [mailto:jmenz24@speakeasy.org]
Sent: Wednesday, April 10, 2002 5:45 PM
To: Tu Nguyen; ccielab@groupstudy.com
Subject: RE: Increase Telnet Connection On Cisco TermServ
Just tried it on my TermServ and it works, am running Version 12.2(1)
TR(config)#line vty 0 10
TR(config-line)#^Z
TR#wr
TR#sh ver
Cisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-JK8OS-L), Version 12.2(1), RELEASE
SOFTWARE
(fc2)
Copyright (c) 1986-2001 by cisco Systems, Inc.
Compiled Fri 27-Apr-01 15:20 by cmong
Image text-base: 0x0307EE08, data-base: 0x00001000
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Tu Nguyen
Sent: Wednesday, April 10, 2002 7:04 PM
To: ccielab@groupstudy.com
Subject: Increase Telnet Connection On Cisco TermServ
Hi All,
Does anyone know how I can increase more than 4 telnet connections on
the Cisco 2511 Term Server? It's only allowed 4, but would like to go
beyond the limitation.
Thanks,
Tu
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:04 GMT-3