From: Mingzhou Nie (mnie@xxxxxxxxx)
Date: Wed Apr 10 2002 - 01:45:24 GMT-3
No, actually ethernet is supported. But you can only configure one HSRP
Group on low end routers.
http://www.cisco.com/warp/public/619/hsrpguide5.shtml
--- Charles Carley <ccarley@columbus.rr.com> wrote:
> Please disregard my question, it seems the E1 interface is not
> supported for
> HSRP but I have a work around. Thank you.
>
> -----Original Message-----
> From: Charles Carley [mailto:ccarley@columbus.rr.com]
> Sent: Monday, April 08, 2002 5:28 PM
> To: Ccie
> Subject: Real world HSRP scenario
>
> Can someone tell me if HSRP is supported on an E1 interface. We have
> a
> customer who will have some elements bridged into an E1 link between
> two
> routers and we would like to be able to add some redundancy to the
> design.
> Effectively this will make the E1 circuit a large LAN with all
> devices
> residing in the same subnet. I don't have the equipment to test
> this and
> wanted to see if anyone was doing a similar configuration. Thanks.
>
> Charles
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:03 GMT-3