From: André Bersvendsen (an-bersv@xxxxxxxxx)
Date: Sun Apr 07 2002 - 06:17:54 GMT-3
Hi Bill,
It is by default not possible to ping local Frame-Relay (or ATM)
interface on a Cisco router. To do this you MUST have a 'frame-relay
map' with the local IP address pointing to one of the DLCI's you have.
The other end of the PVC must have a map back to your interface.
With this configuration you can ping your local interface. But the
packet is transmitted over FR and returned before the ping request is
reaching the local interface.
Remember that you no longer have inverse arp when you have configured
one 'frame-relay map'. So if you use map on a interface for one
destination you must use map's for the other destinations on the same
interface.
Regards,
Andri Bersvendsen
-----Original Message-----
From: Bill Mckenzie
To: ccielab@groupstudy.com
Sent: 06.04.2002 21:12
Subject: PVC-Active Not able to ping
I'm configuring frame relay and the pvc's show active , but I'm not able
to
ping any directly connected interface.
Any help?
Thanks
Bill
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:58 GMT-3