From: Vijay Venkatesh (falcon67@xxxxxxxxx)
Date: Sat Apr 06 2002 - 08:29:52 GMT-3
ALso try the following -
type cntrl-shift-6-x cause it might be possible someone used the
console to sling shot to another device.
Also try changing the console speed and then try diff keys on the
keyboard.
HTH.
-Vijay.
--- Jaya Venkat <jayavenkad@hotmail.com> wrote:
> Hi
> If somebody changed the activation character for the console port
> you will
> face this symptom. IF this is the case try to break into the
> startup config
> and findout any activation character configured for console port.
>
> Regds
> Jv
>
>
> >From: "Balaji Siva" <bsivasub@cisco.com>
> >Reply-To: "Balaji Siva" <bsivasub@cisco.com>
> >To: "Ma Gang" <matthen@zisco.com.cn>, "'ccielab'"
> <ccielab@groupstudy.com>
> >Subject: RE: Catalyst 6506 problem
> >Date: Fri, 5 Apr 2002 09:18:32 -0500
> >MIME-Version: 1.0
> >Received: from [63.104.50.75] by hotmail.com (3.2) with ESMTP id
> >MHotMailBE77000C00254136E85D3F68324B0C7F3; Fri, 05 Apr 2002
> 06:30:56 -0800
> >Received: from localhost (mail@localhost)by groupstudy.com
> (8.9.3/8.9.3)
> >with SMTP id JAA30338;Fri, 5 Apr 2002 09:28:08 -0500
> >Received: by groupstudy.com (bulk_mailer v1.13); Fri, 5 Apr 2002
> 09:18:02
> >-0500
> >Received: (from listserver@localhost)by groupstudy.com
> (8.9.3/8.9.3) id
> >JAA26786GroupStudy Mailer; Fri, 5 Apr 2002 09:18:01 -0500
> >Received: from rooster.cisco.com (rooster.cisco.com
> [64.102.19.200]) by
> >groupstudy.com (8.9.3/8.9.3) with ESMTP id JAA26752 GroupStudy
> Mailer;
> >Fri, 5 Apr 2002 09:17:58 -0500
> >Received: from BSIVASUBW2K (dhcp-64-102-50-165.cisco.com
> [64.102.50.165])
> >by rooster.cisco.com (8.8.8+Sun/8.8.8) with SMTP id JAA03710;
> Fri, 5 Apr
> >2002 09:18:32 -0500 (EST)
> >From nobody@groupstudy.com Fri, 05 Apr 2002 06:32:48 -0800
> >Message-ID: <DFEEKPHECEFMPGCJPKHNKECNCCAA.bsivasub@cisco.com>
> >X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0)
> >In-Reply-To:
> <610679DBD7BED511BB450000E2381B43047050@exchbackup.zisco>
> >X-ASK-Info: Our key was found in the mail
> >Sender: nobody@groupstudy.com
> >Precedence: bulk
> >
> >Does the same PC/console cable work on any other CISCO devices ?
> >
> >Do you see any bent pin in the console port ?
> >
> >If you can telnet in, get the following
> >
> >show config
> >show proc cpu
> >show netstat
> >sh logging buffer -1023
> >
> >
> >i think it is physical layer issue !!!
> >
> >-----Original Message-----
> >From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On
> Behalf Of
> >Ma Gang
> >Sent: Friday, April 05, 2002 9:07 AM
> >To: 'ccielab'
> >Subject: ??: Catalyst 6506 problem
> >
> >
> >Many thanks to all the people who helped. My situation is
> >
> >1. Super Engine II
> >
> >2. Use normal console (roll over) cable
> >
> >3. It worked fine last week. Same PC, same console cable.
> >
> >4. Now the console shows nothing, no reaction when press any key.
> >
> >
> >
> >Matthew Ma
> >
> >-----ee'
> >i.d;6-----
> >ed;6d::: George Stylianou [mailto:georges@is.co.za]
> >eif6i4: Friday, April 05, 2002 12:02 AM
> >f6d;6d::: 'Ma Gang'
> >d8;i": RE: Catalyst 6506 problem
> >
> >
> >
> >Are you using a straight through cable or a Cisco console cable?
> >
> >
> > > -----Original Message-----
> > > From: Ma Gang [mailto:matthen@zisco.com.cn]
> > > Sent: 05 April 2002 07:54
> > > To: ccielab@groupstudy.com
> > > Subject: Catalyst 6506 problem
> > >
> > > Dear All,
> > >
> > > We meet a Catalyst 6506 problem here. The symptom is the
> CONSOLE shows
> > > nothing when the 6506 is booting. The console is configed as
> 9600/8/N/1.
> > > No
> > > matter how I press the keyboard, it still shows nothing.
> > >
> > > Anyone here met this problem before, and how to solve it?
> > >
> > > Thanks in advance.
> > >
> > >
> > >
> > > Regards
> > >
> > > Matthew Ma
> > >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:57 GMT-3