From: Jaya Venkat (jayavenkad@xxxxxxxxxxx)
Date: Sat Apr 06 2002 - 08:12:29 GMT-3
Hi
If somebody changed the activation character for the console port you will
face this symptom. IF this is the case try to break into the startup config
and findout any activation character configured for console port.
Regds
Jv
>From: "Balaji Siva" <bsivasub@cisco.com>
>Reply-To: "Balaji Siva" <bsivasub@cisco.com>
>To: "Ma Gang" <matthen@zisco.com.cn>, "'ccielab'" <ccielab@groupstudy.com>
>Subject: RE: Catalyst 6506 problem
>Date: Fri, 5 Apr 2002 09:18:32 -0500
>MIME-Version: 1.0
>Received: from [63.104.50.75] by hotmail.com (3.2) with ESMTP id
>MHotMailBE77000C00254136E85D3F68324B0C7F3; Fri, 05 Apr 2002 06:30:56 -0800
>Received: from localhost (mail@localhost)by groupstudy.com (8.9.3/8.9.3)
>with SMTP id JAA30338;Fri, 5 Apr 2002 09:28:08 -0500
>Received: by groupstudy.com (bulk_mailer v1.13); Fri, 5 Apr 2002 09:18:02
>-0500
>Received: (from listserver@localhost)by groupstudy.com (8.9.3/8.9.3) id
>JAA26786GroupStudy Mailer; Fri, 5 Apr 2002 09:18:01 -0500
>Received: from rooster.cisco.com (rooster.cisco.com [64.102.19.200]) by
>groupstudy.com (8.9.3/8.9.3) with ESMTP id JAA26752 GroupStudy Mailer;
>Fri, 5 Apr 2002 09:17:58 -0500
>Received: from BSIVASUBW2K (dhcp-64-102-50-165.cisco.com [64.102.50.165])
>by rooster.cisco.com (8.8.8+Sun/8.8.8) with SMTP id JAA03710; Fri, 5 Apr
>2002 09:18:32 -0500 (EST)
>From nobody@groupstudy.com Fri, 05 Apr 2002 06:32:48 -0800
>Message-ID: <DFEEKPHECEFMPGCJPKHNKECNCCAA.bsivasub@cisco.com>
>X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0)
>In-Reply-To: <610679DBD7BED511BB450000E2381B43047050@exchbackup.zisco>
>X-ASK-Info: Our key was found in the mail
>Sender: nobody@groupstudy.com
>Precedence: bulk
>
>Does the same PC/console cable work on any other CISCO devices ?
>
>Do you see any bent pin in the console port ?
>
>If you can telnet in, get the following
>
>show config
>show proc cpu
>show netstat
>sh logging buffer -1023
>
>
>i think it is physical layer issue !!!
>
>-----Original Message-----
>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
>Ma Gang
>Sent: Friday, April 05, 2002 9:07 AM
>To: 'ccielab'
>Subject: ??: Catalyst 6506 problem
>
>
>Many thanks to all the people who helped. My situation is
>
>1. Super Engine II
>
>2. Use normal console (roll over) cable
>
>3. It worked fine last week. Same PC, same console cable.
>
>4. Now the console shows nothing, no reaction when press any key.
>
>
>
>Matthew Ma
>
>-----ee'
>i.d;6-----
>ed;6d::: George Stylianou [mailto:georges@is.co.za]
>eif6i4: Friday, April 05, 2002 12:02 AM
>f6d;6d::: 'Ma Gang'
>d8;i": RE: Catalyst 6506 problem
>
>
>
>Are you using a straight through cable or a Cisco console cable?
>
>
> > -----Original Message-----
> > From: Ma Gang [mailto:matthen@zisco.com.cn]
> > Sent: 05 April 2002 07:54
> > To: ccielab@groupstudy.com
> > Subject: Catalyst 6506 problem
> >
> > Dear All,
> >
> > We meet a Catalyst 6506 problem here. The symptom is the CONSOLE shows
> > nothing when the 6506 is booting. The console is configed as 9600/8/N/1.
> > No
> > matter how I press the keyboard, it still shows nothing.
> >
> > Anyone here met this problem before, and how to solve it?
> >
> > Thanks in advance.
> >
> >
> >
> > Regards
> >
> > Matthew Ma
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:57 GMT-3