From: Williams, Glenn (WILLIAMSG@xxxxxxxxxxxxx)
Date: Fri Apr 05 2002 - 16:13:29 GMT-3
If given a choice in a DLSW scenario where the task is to prevent a DLSW
peer R1 from accessing any say netbios hosts on R2 Tokenring, which would
you choose?
R1
access-list 200 deny 0xf0f0 0x0101
access-list 200 permit 0x0000 0xffff
dlsw remote-peer 0 tcp 2.2.2.2 lsap-output-list 200
OR
R2
access-list 200 deny 0xf0f0 0x0101
access-list 200 permit 0x0000 0xffff
int tok 0
access-expression in lsap(200)
hopefully my syntax is correct.
GW
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:56 GMT-3