From: Bhisham Bajaj (bhishambajaj@xxxxxxxxx)
Date: Wed Apr 03 2002 - 22:40:13 GMT-3
I hope ring-speed is not the saga here
BB
--- "Jenkins, Buddy" <buddy.jenkins@csfb.com> wrote:
> I am having difficulty trying to setup up a very
> basic token ring scenario. I have a 2502 connected
> to an IBM 8228 MAU which is connected to another
> 2502. The Token ring interfaces on both routers are
> up/up. The configuration is like this.
>
>
> R8
>
> interface tokenring 0
> !
> ip address 192.168.3.8 255.255.255.0
> !
>
> R1#
> !
> interface tokenring 0
> !
> ip address 192.168.3.1 255.255.255.0
> !
>
>
> When I ping a routers own interface that is OK.
> When I ping the tokenring interface of the remote
> router I get nada. Debug IP packet show
> encapsulation failed messages so I figured arp was
> not working. I configured static arp and the
> encapsulation failed messages went away but then the
> packet just gets sent into a black hole. Leaves the
> router interface but never arrives at the remote
> router which is on the same ring. I have changed
> cables and changed MAU's. I have even used the MAU
> Lobe tool (or whatever you call it) and every port
> seemed ok. (the red light went out after a few
> seconds and I could hear the relay click in and
> out). I have never setup tokenring so I do not know
> what could be wrong. Do you have to configure a
> router as the Active Monitor or something. Also
> show CDP neighbor reveals nothing. Obviously the
> packet is not traversing the ring from one router to
> the other but I cannot figure this one out. Any
> Ideas? Thanks.
>
> Buddy
>
> This message is for the named person's use only. It
> may contain sensitive and private proprietary or
> legally privileged information. No confidentiality
> or privilege is waived or lost by any
> mistransmission. If you are not the intended
> recipient, please immediately delete it and all
> copies of it from your system, destroy any hard
> copies of it and notify the sender. You must not,
> directly or indirectly, use, disclose, distribute,
> print, or copy any part of this message if you are
> not the intended recipient. CREDIT SUISSE GROUP and
> each legal entity in the CREDIT SUISSE FIRST BOSTON
> or CREDIT SUISSE ASSET MANAGEMENT business units of
> CREDIT SUISSE FIRST BOSTON reserve the right to
> monitor all e-mail communications through its
> networks. Any views expressed in this message are
> those of the individual sender, except where the
> message states otherwise and the sender is
> authorized to state them to be the views of any such
> entity.
> Unless otherwise stated, any pricing information
> given in this message is indicative only, is subject
> to change and does not constitute an offer to deal
> at any price quoted. Any reference to the terms of
> executed transactions should be treated as
> preliminary only and subject to our formal written
> confirmation.
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:53 GMT-3