From: Boehmler, John (jboehmler@xxxxxxxxx)
Date: Wed Apr 03 2002 - 19:52:14 GMT-3
I don't see a ring speed in the interface. Is it there, just not included?
John
At 06:54 AM 4/4/2002 +0900, Jenkins, Buddy wrote:
>I am having difficulty trying to setup up a very basic token ring
>scenario. I have a 2502 connected to an IBM 8228 MAU which is connected
>to another 2502. The Token ring interfaces on both routers are
>up/up. The configuration is like this.
>
>
>R8
>
>interface tokenring 0
>!
>ip address 192.168.3.8 255.255.255.0
>!
>
>R1#
>!
>interface tokenring 0
>!
>ip address 192.168.3.1 255.255.255.0
>!
>
>
>When I ping a routers own interface that is OK. When I ping the tokenring
>interface of the remote router I get nada. Debug IP packet show
>encapsulation failed messages so I figured arp was not working. I
>configured static arp and the encapsulation failed messages went away but
>then the packet just gets sent into a black hole. Leaves the router
>interface but never arrives at the remote router which is on the same
>ring. I have changed cables and changed MAU's. I have even used the MAU
>Lobe tool (or whatever you call it) and every port seemed ok. (the red
>light went out after a few seconds and I could hear the relay click in and
>out). I have never setup tokenring so I do not know what could be
>wrong. Do you have to configure a router as the Active Monitor or
>something. Also show CDP neighbor reveals nothing. Obviously the packet
>is not traversing the ring from one router to the other but I cannot
>figure this one out. Any Ideas? Thanks.
>
>Buddy
>
>This message is for the named person's use only. It may contain sensitive
>and private proprietary or legally privileged information. No
>confidentiality or privilege is waived or lost by any mistransmission. If
>you are not the intended recipient, please immediately delete it and all
>copies of it from your system, destroy any hard copies of it and notify
>the sender. You must not, directly or indirectly, use, disclose,
>distribute, print, or copy any part of this message if you are not the
>intended recipient. CREDIT SUISSE GROUP and each legal entity in the
>CREDIT SUISSE FIRST BOSTON or CREDIT SUISSE ASSET MANAGEMENT business
>units of CREDIT SUISSE FIRST BOSTON reserve the right to monitor all
>e-mail communications through its networks. Any views expressed in this
>message are those of the individual sender, except where the message
>states otherwise and the sender is authorized to state them to be the
>views of any such entity.
>Unless otherwise stated, any pricing information given in this message is
>indicative only, is subject to change and does not constitute an offer to
>deal at any price quoted. Any reference to the terms of executed
>transactions should be treated as preliminary only and subject to our
>formal written confirmation.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:53 GMT-3