From: Jeff K. (Jeffbk@xxxxxxxxxxxxx)
Date: Wed Apr 03 2002 - 16:36:13 GMT-3
I was using the "IP/IPX/AT/IBM/FW PLUS IPSEC 56" image. It's sort of an
Enterprise-lite version for 1600's (or as close as there is for that
series). It requires 8 MB flash / 24 MB RAM. I am running a late version
of 12.2.
HTH,
-Jeff
----- Original Message -----
From: "George Jiang" <zjiang@corp.attcanada.ca>
To: <ccielab@groupstudy.com>
Sent: Wednesday, April 03, 2002 10:50 AM
Subject: RE: ISIS on a 1600 series
> hi, could you please let me know which code are you using?
> as I can't run BGP on my 1605R, I will be more than happy if I can use it
as
> a BGP backbone router.
>
> Thanks.
>
> George
>
> -----Original Message-----
> From: DAN DORTON [mailto:DHSTS68@dhs.state.il.us]
> Sent: Wednesday, April 03, 2002 10:01 AM
> To: steven.j.nelson@bt.com; ccielab@groupstudy.com; e280l132@hotmail.com
> Subject: RE: ISIS on a 1600 series
>
>
> BGP & NTP will work on the 1600's, you just need the right code!
>
> >>> <steven.j.nelson@bt.com> 04/03/02 08:59AM >>>
> as well as BGP and ntp on mine ;(
>
> steve
>
> -----Original Message-----
> From: DAN DORTON [mailto:DHSTS68@dhs.state.il.us]
> Sent: 03 April 2002 14:57
> To: ccielab; e280l132
> Subject: Re: ISIS on a 1600 series
>
>
> Unfortunately ISIS is not supported on the 1600 series.
>
> I have the same problem myself & I have 4 1600's in my lab.
>
> >>> "Brian F" <e280l132@hotmail.com> 04/02/02 02:30PM >>>
> I am having trouble running ISIS on a 1601 router. Has anyone been able to
> get it to work?? do I have a bad version of IOS. I downloaded the latest
> version (from the 12.1 series) 12.1.14. Still no luck. When I am at the
> following prompt. This is what I get
>
> router(config)#router isis
> router)config)#
>
> it never goes into the configuration mode for isis. On my 2500 series I
have
>
> no problem. Can the 1600 even support ISIS?
>
> thanks for any help
>
> -Brian
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:52 GMT-3