From: Sudhanshu Gupta (sudhanshu.gupta@xxxxxxxxxxx)
Date: Thu Apr 04 2002 - 00:43:21 GMT-3
You could try 12.2(8) T, IP only version. It requires only 4/12.
-sudhanshu
> -----Original Message-----
> From: Jeff K. [SMTP:Jeffbk@austin.rr.com]
> Sent: Thursday, April 04, 2002 1:06 AM
> To: George Jiang; ccielab@groupstudy.com
> Subject: Re: ISIS on a 1600 series
>
> I was using the "IP/IPX/AT/IBM/FW PLUS IPSEC 56" image. It's sort of an
> Enterprise-lite version for 1600's (or as close as there is for that
> series). It requires 8 MB flash / 24 MB RAM. I am running a late version
> of 12.2.
>
> HTH,
>
> -Jeff
>
> ----- Original Message -----
> From: "George Jiang" <zjiang@corp.attcanada.ca>
> To: <ccielab@groupstudy.com>
> Sent: Wednesday, April 03, 2002 10:50 AM
> Subject: RE: ISIS on a 1600 series
>
>
> > hi, could you please let me know which code are you using?
> > as I can't run BGP on my 1605R, I will be more than happy if I can use
> it
> as
> > a BGP backbone router.
> >
> > Thanks.
> >
> > George
> >
> > -----Original Message-----
> > From: DAN DORTON [mailto:DHSTS68@dhs.state.il.us]
> > Sent: Wednesday, April 03, 2002 10:01 AM
> > To: steven.j.nelson@bt.com; ccielab@groupstudy.com; e280l132@hotmail.com
> > Subject: RE: ISIS on a 1600 series
> >
> >
> > BGP & NTP will work on the 1600's, you just need the right code!
> >
> > >>> <steven.j.nelson@bt.com> 04/03/02 08:59AM >>>
> > as well as BGP and ntp on mine ;(
> >
> > steve
> >
> > -----Original Message-----
> > From: DAN DORTON [mailto:DHSTS68@dhs.state.il.us]
> > Sent: 03 April 2002 14:57
> > To: ccielab; e280l132
> > Subject: Re: ISIS on a 1600 series
> >
> >
> > Unfortunately ISIS is not supported on the 1600 series.
> >
> > I have the same problem myself & I have 4 1600's in my lab.
> >
> > >>> "Brian F" <e280l132@hotmail.com> 04/02/02 02:30PM >>>
> > I am having trouble running ISIS on a 1601 router. Has anyone been able
> to
> > get it to work?? do I have a bad version of IOS. I downloaded the latest
> > version (from the 12.1 series) 12.1.14. Still no luck. When I am at the
> > following prompt. This is what I get
> >
> > router(config)#router isis
> > router)config)#
> >
> > it never goes into the configuration mode for isis. On my 2500 series I
> have
> >
> > no problem. Can the 1600 even support ISIS?
> >
> > thanks for any help
> >
> > -Brian
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:53 GMT-3