From: Jaeheon Yoo (kghost@xxxxxxxxxxxx)
Date: Tue Apr 02 2002 - 22:02:47 GMT-3
Tarek.
I believe the following link will help you.
It's a related thread in which I took part in last Feb.
http://www.groupstudy.com/archives/ccielab/200202/msg00433.html
Jaeheon
----- Original Message -----
From: "Tarek Sabry" <tsabry@houston.sns.slb.com>
To: <ccielab@groupstudy.com>
Sent: Wednesday, April 03, 2002 6:42 AM
Subject: Inverse ARP
> Hi
>
> I know this topic may have been beaten to death but I would appreciate it if
> someone can give me any tips for dealing with this. I fully-meshed the F/R
> switch. But I disabled inverse-arp on all my interfaces. Why do I still see
> this dynamic mapping for DLCI 302 below???? What could be the reason? I
> reload the IOS on the router, but it didn't help! I understand if the PVC is
> active because there's no way around that, but why is it MAPPED?!!!
>
> Thanks
> Tarek
>
>
> r3#sh run
> Building configuration...
>
> Current configuration:
> !
> version 12.0
> ...
> ...
> !
> !
> interface Serial0/0
> ip address 10.10.10.3 255.255.255.0
> no ip directed-broadcast
> encapsulation frame-relay
> no ip mroute-cache
> frame-relay map ip 10.10.10.1 301 broadcast
> frame-relay interface-dlci 301
> no frame-relay inverse-arp
> frame-relay lmi-type ansi
> !
> ...
> ...
> !
> end
> r3#
> r3#sh frame map
> Serial0/0 (up): ip 10.10.10.1 dlci 301(0x12D,0x48D0), static,
> broadcast,
> CISCO, status defined, active
> Serial0/0 (up): ip 10.10.10.2 dlci 302(0x12E,0x48E0), dynamic,
> broadcast,, status defined, active
> r3#
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:52 GMT-3