From: Sam.MicroGate@xxxxxxxxxxxxxx
Date: Tue Apr 02 2002 - 19:14:05 GMT-3
Hello
Can you please look at the following config and let me know if this OK when
redistributing between routing protocols? If I have a router with 3 routing
protocols as follows:
Protocol 1: networks a, b and c plus the connected interface X.
Protocol 2: networks d, e and f plus the connected interface Y.
Protocol 3: networks g, h and i plus the connected interface Z.
When distribute between these routing protocol I would do the following:
router protocol 1
redistribute protocol 2 route-map filter_abc
redistribute protocol 3 route-map filter_abc
redistribute connected route-map interfaceX
default-metric whatever
router protocol 2
redistribute protocol 1 route-map filter_def
redistribute protocol 3 route-map filter_def
redistribute connected route-map interfaceY
default-metric whatever
router protocol 3
redistribute protocol 2 route-map filter_ghi
redistribute protocol 1 route-map filter_ghi
redistribute connected route-map interfaceX
default-metric whatever
After finishing this step, I have to take care of the FLSM/VLSM issue by
using summarization or whatever. Is there any chance that a routing loop
happen in this network?
Elsayed
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:52 GMT-3