From: Minh Vuong (mvuong@xxxxxxxxx)
Date: Tue Apr 02 2002 - 19:07:24 GMT-3
Do you know why dialer-group is needed on R5 if I don't want R5 to dial out?
Thanks.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Brian Dennis
Sent: Wednesday, March 13, 2002 11:23 AM
To: Giveortake@aol.com; ccielab@groupstudy.com
Subject: Re: ISDN pinging trouble
You need the dialer-group command under R5's bri interface.
Brian Dennis, CCIE #2210 (R&S)(ISP Dial)
On Tuesday 12 March 2002 08:43 pm, Giveortake@aol.com wrote:
> And the legendary configs
>
> R2#show run
> Building configuration...
>
> Current configuration:
> !
> version 12.0
> service timestamps debug uptime
> service timestamps log uptime
> no service password-encryption
> !
> hostname R2
> !
> enable secret 5 $1$qlE3$MWZ/p0uPBMKbyzV/PzwXZ1
> !
> username R5 password 0 cisco
> ip subnet-zero
> isdn switch-type basic-ni
> !
> !
> !
> !
> !
> interface Serial0
> no ip address
> no ip directed-broadcast
> encapsulation frame-relay
> no ip mroute-cache
> logging event subif-link-status
> logging event dlci-status-change
> shutdown
> no fair-queue
> no frame-relay inverse-arp
> !
> interface Serial0.1 point-to-point
> ip address 150.50.24.2 255.255.255.0
> no ip directed-broadcast
> frame-relay interface-dlci 104
> !
> interface Serial1
> no ip address
> no ip directed-broadcast
> shutdown
> !
> interface TokenRing0
> no ip address
> no ip directed-broadcast
> shutdown
> !
> interface BRI0
> ip address 192.168.1.1 255.255.255.0
> no ip directed-broadcast
> encapsulation ppp
> dialer idle-timeout 900
> dialer map ip 192.168.1.2 name R5 broadcast 5418545
> dialer map ip 192.168.1.2 name R5 broadcast 5418546
> dialer load-threshold 1 outbound
> dialer-group 1
> isdn switch-type basic-ni
> isdn spid1 61678903240101
> isdn spid2 61678903250101
> ppp authentication chap
> !
> ip classless
> !
> access-list 101 permit ip any any
> dialer-list 1 protocol ip list 101
> !
> !
> line con 0
> transport input none
> line aux 0
> line vty 0 4
> password alpha4
> login
> !
> end
>
>
> R5#show run
> Building configuration...
>
> Current configuration:
> !
> version 12.0
> service timestamps debug uptime
> service timestamps log uptime
> no service password-encryption
> !
> hostname R5
> !
> enable secret 5 $1$hm9M$BAvgca2AY6JPCW4jpDXd//
> !
> username R2 password 0 cisco
> ip subnet-zero
> !
> isdn switch-type basic-ni
> !
> !
> !
> interface Ethernet0
> ip address 10.10.10.1 255.255.255.0
> no ip directed-broadcast
> !
> interface Serial0
> no ip address
> no ip directed-broadcast
> no ip mroute-cache
> shutdown
> !
> interface Serial1
> no ip address
> no ip directed-broadcast
> shutdown
> !
> interface BRI0
> ip address 192.168.1.2 255.255.255.0
> no ip directed-broadcast
> encapsulation ppp
> dialer idle-timeout 900
> dialer map ip 192.168.1.1 name R2 broadcast
> isdn switch-type basic-ni
> isdn spid1 61654185450101
> isdn spid2 61654185460101
> ppp authentication chap
> !
> no ip http server
> ip classless
> !
> dialer-list 1 protocol ip permit
> !
> line con 0
> transport input none
> line aux 0
> line vty 0 4
> password alpha4
> login
> !
> end
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:52 GMT-3