From: Gregg Malcolm (greggm@xxxxxxxxxxxxx)
Date: Mon Apr 01 2002 - 18:28:17 GMT-3
While we are on the subject of IPX, does anyone know the rules for NLSP
route-filtering ? Can you filter between NLSP peers or it is only when you
re-dist from another IPX routing protocol ? I seem to remember something
about this but I cannot find it.
Thanks, Gregg
----- Original Message -----
From: "Jaspreet Bhatia" <jasbhati@cisco.com>
To: "Lupi, Guy" <Guy.Lupi@eurekaggn.com>
Cc: <ccielab@groupstudy.com>
Sent: Monday, April 01, 2002 10:52 AM
Subject: Re: IPX stuff
> IPX Gotchas
>
> 1) Do not use RIP on frame relay hub and spoke because you cannot turn
off
> split horizon.
>
> 2) When using IPX over DDR if you use a restrictive dialer list ,be sure
> to include static routes to the remote network and static SAP to remote
> servers
>
> 3) When you include a static SAP to a remote server across and ISDN line
> and there is a local server also use the command # ipx
> gns-response-delay 1000
>
> 4) Don't forget to spoof spx and watchdog packets across and ISDN line
>
> 5) NLSP cannot run on loopback,FR physical ,FR Multipoint interfaces
> .Remember to turn off IPX RIP and SAP with
> # ipx nlsp rip off
> # ipx nlsp sap off
>
> 6) Remember that the split horizon rule applies to SAPs as well .
>
> 7) If you are doing GRE tunneling , be sure that you are not blocking TCP
> port 47 along the way .
>
> 8) When buling a restrictive dialer list for IPX over DDR remember
> to include the line for Novell Serialization packets ie IPX socket no.
457
>
> 9) Permit SAP type 0x107 for RCONSOLE to work across the WAN
>
> I can't think of any other right now .
>
> HTH
>
> Jaspreet
>
> At 01:09 PM 4/1/2002 -0500, you wrote:
> >Does anyone have a list of IPX gotcha's that they wouldn't mind sharing?
I
> >am ok with all the basic protocols and stuff, but I don't really have a
list
> >of "watch out for this". Thanks.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:51 GMT-3