From: Muhamamd Durrani (dan_schaw@xxxxxxxxx)
Date: Mon Apr 01 2002 - 13:14:56 GMT-3
Hi,
Agree .
You should specify the method of notification either
(BECN or forsight). without adaptive shaping how to do
this. Any Clue (Mamoor)
Mamooor : Could you pls forward us a reference to the
doc. you read from , may be there is some good point
we are mis-interpreting.
Regards,
--- "Williams, Glenn" <WILLIAMSG@PANASONIC.COM> wrote:
> if you disable adaptive shaping becn, then how will
> you react to congestion
> if you have min cir set. Seems to me that you would
> usually want it on. Is
> this not correct?
> GW
>
> -----Original Message-----
> From: Ahmed Mamoor Amimi [mailto:mamoor@ieee.org]
> Sent: Sunday, March 31, 2002 4:47 PM
> To: Muhamamd Durrani; mascot net;
> ccielab@groupstudy.com
> Subject: Re: FRTS
>
>
> As my per understanding... adaptive shaping uses the
> automatic shaping ,
> working with the BECN.
> and FRTS use the manual that we have to set the cir
> and other stuff manually
> to control all the fields.
>
> if we just enable adaptive shaping then when there
> is congestion and BECN
> comes the traffic will be cut to
> 1/8 times of the total bandwidth of the interface on
> whcih it is configured.
>
> So when doing FRTS u should disable adapive shape so
> it dont come it between
> this shapping.
>
>
> Please correct me if my understanding is wrong.
>
> -Mamoor
>
>
> ----- Original Message -----
> From: Muhamamd Durrani <dan_schaw@yahoo.com>
> To: mascot net <mascotnet@yahoo.com>;
> <ccielab@groupstudy.com>
> Sent: Monday, April 01, 2002 3:21 AM
> Subject: Re: FRTS
>
>
> > Enabling FRTS on an interface enables both traffic
> > shaping and per-VC queueing on all the PVCs and
> SVCs
> > on the interface. Traffic shaping enables the
> router
> > to control the output rate of the circuit and
> "react
> > to congestion notification information if also
> > configured."
> >
> > SO your Answer is " YES" we can disable Adaptive
> > Shaping while Traffic Shaping is ON .......
> >
> > PS: see the quoted line ......
> >
> > Regards,
> > Muhammad
> >
> >
> > --- mascot net <mascotnet@yahoo.com> wrote:
> > > Could anyone clarify if I should use the command
> "no
> > > frame-relay adaptive-shaping" when I configure
> FRTS.
> > >
> > > -Mascot
> > >
> > >
> > >
> > >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:51 GMT-3