From: Khan Munib (Munib.Khan@xxxxxxxxxxxxxxxxxxxx)
Date: Fri Mar 29 2002 - 18:32:25 GMT-3
Many thanx to all that replied. I actually have a 2610 with a F/Ethernet
module 1FE-TX. I also only have 32/8 mem and flash. managed to find
c2600-js-mz.120-3.T3.bin which goes on and gives me the dot1q encapsulation.
However it`s not ideal as many other features are not there, eg. manually
setting the router ID under ospf etc. But at least my router on a stick
works. Thanx again for your input.
-----Original Message-----
From: kym blair [mailto:kymblair@hotmail.com]
Sent: 29 March 2002 21:19
To: franjime@cisco.com; Munib.Khan@services.fujitsu.com;
ccielab@groupstudy.com
Subject: RE: trunking on 2600
My 2620 with c2600-js-mz.122-1.bin (12.2(1) Enterprise Plus) has the
encapsulation methods you are looking for:
R2(config)#int fast 0/0.30
R2(config-subif)#encap ?
dot1Q IEEE 802.1Q Virtual LAN
isl Inter Switch Link - Virtual LAN encapsulation
sde IEEE 802.10 Virtual LAN - Secure Data Exchange
tr-isl Token Ring Inter Switch Link - Virtual LAN encapsulation
R2#sh version
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-JS-M), Version 12.2(1), RELEASE SOFTWARE
(fc2)
<snip>
System image file is "flash:c2600-js-mz.122-1.bin"
HTH, Kym
>From: "Frank Jimenez" <franjime@cisco.com>
>Reply-To: "Frank Jimenez" <franjime@cisco.com>
>To: "'Khan Munib'" <Munib.Khan@services.fujitsu.com>,
><ccielab@groupstudy.com>
>Subject: RE: trunking on 2600
>Date: Fri, 29 Mar 2002 12:37:52 -0600
>
>Found it.
>
>http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122relnt
>/xprn122t/122tnewf.htm
>
>"802.1Q encapsulation is supported on the built-in ethernet ports of the
>Cisco 2610, 2611, and 2612 in Cisco IOS Release 12.2(2)T and later
>releases. The NM-1E, NM-4E, NM-1E2W, NM-1E1R2W, and NM-2E2W do not
>support 802.1Q in Cisco 2600 or 3600 series routers."
>
>Frank Jimenez, CCIE #5738
>franjime@cisco.com
>
>
>-----Original Message-----
>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
>Khan Munib
>Sent: Friday, March 29, 2002 10:53 AM
>To: 'ccielab@groupstudy.com'
>Subject: trunking on 2600
>
>
>Can anyone tell me what the software version I need on my 2600 to allow
>me to do dot1q trunking. Currently running c2600-js-mz.120-21a.bin
>which only gives me the option of using ISL, SDE or TRISL. My router
>has 32/8 mem and flash....many thanx in advance........
>
>This e-mail is only for the use of its intended recipient. Its contents
>are confidential and may be privileged. ICL does not guarantee that
>this e-mail has not been intercepted and amended or that it is
>virus-free.
>
>Munib Ali Khan
>Network Services
>
>Please note that from 2nd April 2002, ICL will operate as Fujitsu
>Services under the Fujitsu brand name. Therefore my contact details
>will change. My new e-mail address will change to
>Munib.Khan@services.fujitsu.com from 2nd April.
>
>ICL, Cavendish Road, Stevenage Herts. SG1 2DY
>Tel: +44 (0) 870 234 8171 or 7301 5515
>Mobile : +44 (0) 7867 823 214
>Fax: +44 (0) 870 234 9199 or 7301 2000
>E-mail: munib.khan@icl.com
>Web: www.icl.com
>
>International Computers Limited, Registered in England no 96056,
>Registered Office 26, Finsbury Square, London, EC2A 1SL
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:26 GMT-3