From: Paul \(SESAMe\) (paul@xxxxxxxxxxxxxx)
Date: Wed Mar 27 2002 - 08:41:57 GMT-3
Hi All,
Rebooted the frame switch this morning and all is well? Looked at every
other conceivable problem except the most basic one! I had used the same
config for other labs so I had 'ass-umed' that it would be fine
Thanks to everyone for their input! :- )
Paul
----- Original Message -----
From: "Paul (SESAMe)" <paul@sesamedata.net>
To: <ccielab@groupstudy.com>
Sent: Wednesday, March 27, 2002 1:02 AM
Subject: OSPF Stuck in Ex-Start
> Hi All,
>
> Has anyone come across a problem with OSPF whereby the Neighbour adjacency
> process
> becomes stuck in the EX-Start state?
>
> I am currently working on a lab that is working with OSPF and frame relay
> and I am stuck with this problem. I have tried everything I can think of
but
> it is all starting to look a little hazy now and config blindness is
> beginning to set in!
>
> I can post my configs if necessary but though I would see if anyone else
> has come across this before? If you have I would love to know how you
> resolved this.
>
> I have had a looked on CCO (Bug finder also). There are references to a
> stuck in Ex-start but it is mainly put down to miss matched MTU's which is
> not a problem as all routers are set to the default of 1500. Sequence
> numbers are also a possibility, but I haven't the faintest idea where to
> start with these!
>
> Thanks, Paul
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:23 GMT-3