From: austin.2.alao@xxxxxx
Date: Wed Mar 27 2002 - 07:28:41 GMT-3
What does "show flash" command reveal?
Are the deleted files still showing?
Maybe the new versions of code is auto-squeezing out the deleted files.
-----Original Message-----
From: MADMAN [mailto:dmadlan@qwest.com]
Sent: 26 March 2002 23:07
To: Jason T. Rohm
Cc: 'Carlos A. Silva'; CCIELIST (E-mail)
Subject: Re: squeeze flash:
I can't squeeze in 12.1.13. I am reasonably sure squeezing on a 2600 is
pretty new, I know I couldn't do it a while back. This same router allows
squeeze with 12.2.7b.
C2621A#sh ver
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-I-M), Version 12.1(13), RELEASE SOFTWARE
(fc3)
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Wed 30-Jan-02 19:37 by kellythw
Image text-base: 0x80008088, data-base: 0x80826628
ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
C2621A uptime is 19 minutes
System returned to ROM by reload
System image file is "flash:c2600-i-mz.121-13.bin"
cisco 2621 (MPC860) processor (revision 0x102) with 45056K/4096K bytes of
memory . Processor board ID JAD050103KZ (661766965) M860 processor: part
number 0, mask 49 Bridging software. X.25 software, Version 3.0.0. 2
FastEthernet/IEEE 802.3 interface(s) 1 Serial network interface(s) 32K bytes
of non-volatile configuration memory. 16384K bytes of processor board System
flash (Read/Write)
Configuration register is 0x2102
C2621A#squeeze ?
% Unrecognized command
C2621A#squeeze
Dave
"Jason T. Rohm" wrote:
>
> What version of code are you running? I'm running 12.2(6a)
> IP/3Des/FW/IDS and it is in there. CCO has it listed as 11.1+ (But I
> used it on 10.3, so I don't know what they are smoking).
>
> The whole point of this command is that you can get rid of the
> [deleted] files w/o losing the other files. I am using the flash to
> store the base configurations on the routers so I don't have to
> cut/paste or tftp them when I reset them for my labs.
>
> Jason T. Rohm
> CCIE #6861
> jtrohm@athenet.net (home)
> jtrohm@wiretech-inc.com (work)
>
> -----Original Message-----
> From: Carlos A. Silva [mailto:carlos@mnet.com.mx]
> Sent: Wednesday, March 27, 2002 4:37 AM
> To: Jason T. Rohm
> Subject: RE: squeeze flash:
>
> i tried it on a 2600 and the command is not even supported...
>
> % Unrecognized command
> R3#sq?
> % Unrecognized command
> R3#squeeze flash
> ^
> % Invalid input detected at '^' marker.
>
> R3#
>
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf
> > Of Jason T. Rohm
> > Sent: Tuesday, March 26, 2002 11:07 AM
> > To: CCIELIST (E-mail)
> > Subject: squeeze flash:
> >
> >
> > I am unable to squeeze the flash on my 2600 series routers. I
> > haven't tried this lately (the last time was two years ago on a 2500
> > series).
> >
> > I receive an error: "%Error squeezing flash ()"
> >
> > The "Error squeezing flash" phrase does not show up on the cisco
> > website or in a google search. Does anyone have ideas on why this
> > doesn't work?
> >
> > Jason T. Rohm
> > CCIE #6861
> > jtrohm@athenet.net (home)
> > jtrohm@wiretech-inc.com (work)
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:23 GMT-3