From: MADMAN (dmadlan@xxxxxxxxx)
Date: Tue Mar 26 2002 - 20:07:07 GMT-3
I can't squeeze in 12.1.13. I am reasonably sure squeezing on a 2600
is pretty new, I know I couldn't do it a while back. This same router
allows squeeze with 12.2.7b.
C2621A#sh ver
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-I-M), Version 12.1(13), RELEASE SOFTWARE
(fc3)
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Wed 30-Jan-02 19:37 by kellythw
Image text-base: 0x80008088, data-base: 0x80826628
ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
C2621A uptime is 19 minutes
System returned to ROM by reload
System image file is "flash:c2600-i-mz.121-13.bin"
cisco 2621 (MPC860) processor (revision 0x102) with 45056K/4096K bytes
of memory
.
Processor board ID JAD050103KZ (661766965)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
2 FastEthernet/IEEE 802.3 interface(s)
1 Serial network interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
C2621A#squeeze ?
% Unrecognized command
C2621A#squeeze
Dave
"Jason T. Rohm" wrote:
>
> What version of code are you running? I'm running 12.2(6a) IP/3Des/FW/IDS
> and it is in there. CCO has it listed as 11.1+ (But I used it on 10.3, so I
> don't know what they are smoking).
>
> The whole point of this command is that you can get rid of the [deleted]
> files w/o losing the other files. I am using the flash to store the base
> configurations on the routers so I don't have to cut/paste or tftp them when
> I reset them for my labs.
>
> Jason T. Rohm
> CCIE #6861
> jtrohm@athenet.net (home)
> jtrohm@wiretech-inc.com (work)
>
> -----Original Message-----
> From: Carlos A. Silva [mailto:carlos@mnet.com.mx]
> Sent: Wednesday, March 27, 2002 4:37 AM
> To: Jason T. Rohm
> Subject: RE: squeeze flash:
>
> i tried it on a 2600 and the command is not even supported...
>
> % Unrecognized command
> R3#sq?
> % Unrecognized command
> R3#squeeze flash
> ^
> % Invalid input detected at '^' marker.
>
> R3#
>
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> > Jason T. Rohm
> > Sent: Tuesday, March 26, 2002 11:07 AM
> > To: CCIELIST (E-mail)
> > Subject: squeeze flash:
> >
> >
> > I am unable to squeeze the flash on my 2600 series routers. I
> > haven't tried
> > this lately (the last time was two years ago on a 2500 series).
> >
> > I receive an error: "%Error squeezing flash ()"
> >
> > The "Error squeezing flash" phrase does not show up on the cisco
> > website or
> > in a google search. Does anyone have ideas on why this doesn't work?
> >
> > Jason T. Rohm
> > CCIE #6861
> > jtrohm@athenet.net (home)
> > jtrohm@wiretech-inc.com (work)
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:22 GMT-3