From: Jason T. Rohm (jtrohm@xxxxxxxxxxx)
Date: Tue Mar 26 2002 - 19:32:21 GMT-3
This appears to be a bug. I upgraded from 12.2(6) to 12.2(7b) and now it
works...
Jason T. Rohm
CCIE #6861
jtrohm@athenet.net (home)
jtrohm@wiretech-inc.com (work)
-----Original Message-----
From: Jeff K. [mailto:Jeffbk@austin.rr.com]
Sent: Tuesday, March 26, 2002 4:19 PM
To: Jason T. Rohm; 'Carlos A. Silva'; CCIELIST (E-mail)
Subject: Re: squeeze flash:
I've also noticed that squeeze wasn't there on 2600 / 3600s until recent
images. The release notes for 12.2XA talk about this being a new addition:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122relnt/260
0/rn2600xa.htm#xtocid26
-Jeff
----- Original Message -----
From: "Jason T. Rohm" <jtrohm@athenet.net>
To: "'Carlos A. Silva'" <carlos@mnet.com.mx>; "CCIELIST (E-mail)"
<ccielab@groupstudy.com>
Sent: Tuesday, March 26, 2002 3:25 PM
Subject: RE: squeeze flash:
> I've used it on 2500s in the past, so I don't know if that is true...
> perhaps a bug or related to feature set? If it worked on 2500s then it
> isn't related to run-from-RAM, run-from-flash issues.
>
> Jason T. Rohm
> CCIE #6861
> jtrohm@athenet.net (home)
> jtrohm@wiretech-inc.com (work)
>
>
>
> -----Original Message-----
> From: Carlos A. Silva [mailto:carlos@mnet.com.mx]
> Sent: Wednesday, March 27, 2002 5:16 AM
> To: jtrohm@athenet.net
> Subject: RE: squeeze flash:
>
>
> right...i've used it several times but only on the bigger platforms.
>
> i'm using 12.1.5T on a 2600, but the command does not exist...
> you think it activates maybe when you use a pcmcia flash?
>
>
>
>
>
>
> > -----Original Message-----
> > From: Jason T. Rohm [mailto:jtrohm@athenet.net]
> > Sent: Tuesday, March 26, 2002 1:07 PM
> > To: 'Carlos A. Silva'; CCIELIST (E-mail)
> > Subject: RE: squeeze flash:
> >
> >
> > What version of code are you running? I'm running 12.2(6a)
IP/3Des/FW/IDS
> > and it is in there. CCO has it listed as 11.1+ (But I used it on
> > 10.3, so I
> > don't know what they are smoking).
> >
> > The whole point of this command is that you can get rid of the [deleted]
> > files w/o losing the other files. I am using the flash to store the base
> > configurations on the routers so I don't have to cut/paste or
> > tftp them when
> > I reset them for my labs.
> >
> > Jason T. Rohm
> > CCIE #6861
> > jtrohm@athenet.net (home)
> > jtrohm@wiretech-inc.com (work)
> >
> >
> >
> > -----Original Message-----
> > From: Carlos A. Silva [mailto:carlos@mnet.com.mx]
> > Sent: Wednesday, March 27, 2002 4:37 AM
> > To: Jason T. Rohm
> > Subject: RE: squeeze flash:
> >
> >
> > i tried it on a 2600 and the command is not even supported...
> >
> > % Unrecognized command
> > R3#sq?
> > % Unrecognized command
> > R3#squeeze flash
> > ^
> > % Invalid input detected at '^' marker.
> >
> > R3#
> >
> >
> >
> >
> > > -----Original Message-----
> > > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> > > Jason T. Rohm
> > > Sent: Tuesday, March 26, 2002 11:07 AM
> > > To: CCIELIST (E-mail)
> > > Subject: squeeze flash:
> > >
> > >
> > > I am unable to squeeze the flash on my 2600 series routers. I
> > > haven't tried
> > > this lately (the last time was two years ago on a 2500 series).
> > >
> > > I receive an error: "%Error squeezing flash ()"
> > >
> > > The "Error squeezing flash" phrase does not show up on the cisco
> > > website or
> > > in a google search. Does anyone have ideas on why this doesn't work?
> > >
> > > Jason T. Rohm
> > > CCIE #6861
> > > jtrohm@athenet.net (home)
> > > jtrohm@wiretech-inc.com (work)
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:22 GMT-3