From: Jason T. Rohm (jtrohm@xxxxxxxxxxx)
Date: Tue Mar 26 2002 - 18:07:25 GMT-3
What version of code are you running? I'm running 12.2(6a) IP/3Des/FW/IDS
and it is in there. CCO has it listed as 11.1+ (But I used it on 10.3, so I
don't know what they are smoking).
The whole point of this command is that you can get rid of the [deleted]
files w/o losing the other files. I am using the flash to store the base
configurations on the routers so I don't have to cut/paste or tftp them when
I reset them for my labs.
Jason T. Rohm
CCIE #6861
jtrohm@athenet.net (home)
jtrohm@wiretech-inc.com (work)
-----Original Message-----
From: Carlos A. Silva [mailto:carlos@mnet.com.mx]
Sent: Wednesday, March 27, 2002 4:37 AM
To: Jason T. Rohm
Subject: RE: squeeze flash:
i tried it on a 2600 and the command is not even supported...
% Unrecognized command
R3#sq?
% Unrecognized command
R3#squeeze flash
^
% Invalid input detected at '^' marker.
R3#
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> Jason T. Rohm
> Sent: Tuesday, March 26, 2002 11:07 AM
> To: CCIELIST (E-mail)
> Subject: squeeze flash:
>
>
> I am unable to squeeze the flash on my 2600 series routers. I
> haven't tried
> this lately (the last time was two years ago on a 2500 series).
>
> I receive an error: "%Error squeezing flash ()"
>
> The "Error squeezing flash" phrase does not show up on the cisco
> website or
> in a google search. Does anyone have ideas on why this doesn't work?
>
> Jason T. Rohm
> CCIE #6861
> jtrohm@athenet.net (home)
> jtrohm@wiretech-inc.com (work)
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:22 GMT-3