From: Jason T. Rohm (jtrohm@xxxxxxxxxxx)
Date: Tue Mar 26 2002 - 18:25:50 GMT-3
I've used it on 2500s in the past, so I don't know if that is true...
perhaps a bug or related to feature set? If it worked on 2500s then it
isn't related to run-from-RAM, run-from-flash issues.
Jason T. Rohm
CCIE #6861
jtrohm@athenet.net (home)
jtrohm@wiretech-inc.com (work)
-----Original Message-----
From: Carlos A. Silva [mailto:carlos@mnet.com.mx]
Sent: Wednesday, March 27, 2002 5:16 AM
To: jtrohm@athenet.net
Subject: RE: squeeze flash:
right...i've used it several times but only on the bigger platforms.
i'm using 12.1.5T on a 2600, but the command does not exist...
you think it activates maybe when you use a pcmcia flash?
> -----Original Message-----
> From: Jason T. Rohm [mailto:jtrohm@athenet.net]
> Sent: Tuesday, March 26, 2002 1:07 PM
> To: 'Carlos A. Silva'; CCIELIST (E-mail)
> Subject: RE: squeeze flash:
>
>
> What version of code are you running? I'm running 12.2(6a) IP/3Des/FW/IDS
> and it is in there. CCO has it listed as 11.1+ (But I used it on
> 10.3, so I
> don't know what they are smoking).
>
> The whole point of this command is that you can get rid of the [deleted]
> files w/o losing the other files. I am using the flash to store the base
> configurations on the routers so I don't have to cut/paste or
> tftp them when
> I reset them for my labs.
>
> Jason T. Rohm
> CCIE #6861
> jtrohm@athenet.net (home)
> jtrohm@wiretech-inc.com (work)
>
>
>
> -----Original Message-----
> From: Carlos A. Silva [mailto:carlos@mnet.com.mx]
> Sent: Wednesday, March 27, 2002 4:37 AM
> To: Jason T. Rohm
> Subject: RE: squeeze flash:
>
>
> i tried it on a 2600 and the command is not even supported...
>
> % Unrecognized command
> R3#sq?
> % Unrecognized command
> R3#squeeze flash
> ^
> % Invalid input detected at '^' marker.
>
> R3#
>
>
>
>
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> > Jason T. Rohm
> > Sent: Tuesday, March 26, 2002 11:07 AM
> > To: CCIELIST (E-mail)
> > Subject: squeeze flash:
> >
> >
> > I am unable to squeeze the flash on my 2600 series routers. I
> > haven't tried
> > this lately (the last time was two years ago on a 2500 series).
> >
> > I receive an error: "%Error squeezing flash ()"
> >
> > The "Error squeezing flash" phrase does not show up on the cisco
> > website or
> > in a google search. Does anyone have ideas on why this doesn't work?
> >
> > Jason T. Rohm
> > CCIE #6861
> > jtrohm@athenet.net (home)
> > jtrohm@wiretech-inc.com (work)
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:22 GMT-3