From: Nelson Salvatorelli (nsalvato@xxxxxxxxx)
Date: Sun Mar 24 2002 - 22:04:39 GMT-3
Remember that when doing static SAPs, they will not be received by the
EIGRP peers unless they have a routing entry in the 'ipx routing table'
for the advertising server network.
This is for example, you have
ipx sap 4 server2 ABC.2222.2222.2222 452 2
Network ABC should be reachable via EIGRP on all the routers you want to
receive this static server entry...
Hope this clarifies... or applies to your scenario...
See my previous email about my setup... Emulating your scenario in my
lab!
Cheers,
-nelson
> -----Original Message-----
> From: Louis Krucker [mailto:lkrucker@swissonline.ch]
> Sent: 24 March 2002 17:34
> To: Ahmed Mamoor Amimi; Ccielab@Groupstudy. Com
> Subject: AW: IPX Eigrp with static SAP
>
>
> Sorry Mamoor i was too fast:-) the problem is solved so far
>
> But can you explain me why my saps are not advertised over wan?
>
> The wan link was in Netw. C and the sap was in netw E2
>
>
> ipx sap 4 server E2.00c0.c769.2081 451 1
> ipx sap 4 server2 ABC.2222.2222.2222 452 2
> ipx sap 6 fileserver E2.0000.0000.000e 456 2
>
> the only sap advertised by eigrp over wan is the server2 sap,
> does somebody know why?
>
>
> wg1r3
> --
> | |
> --
> * ptmp *
> S1/0
> wg1r2 * * wg1r4
> -- --
> | | ----------Ethernet------------| |
> -- --
>
>
>
>
>
> -----Urspr|ngliche Nachricht-----
> Von: Ahmed Mamoor Amimi [mailto:mamoor@ieee.org]
> Gesendet: Sonntag, 24. Mdrz 2002 17:46
> An: Louis Krucker; Ccielab@Groupstudy. Com
> Betreff: Re: IPX Eigrp with static SAP
>
>
> The only problem with ipx sap is the splite-horizon.
> wg1r4 will think why should i advertise the sap entry to
> wg1r2 as the static entry already comes from ehternet.
>
> So the best solution for this is to make a loopback on wg1r4
> , add that into ipx network and make the entry like this : if
> loopback address is 4a , ipx sap 4 server 4a.2222.222.2222 1 1
>
> This will make sure that sap is coming from loopback network
> and SHOULD be advertise to ethernet and serial.
>
>
> let me know if this help !
>
> -Mamoor
>
> ----- Original Message -----
> From: Louis Krucker <lkrucker@swissonline.ch>
> To: Ccielab@Groupstudy. Com <ccielab@groupstudy.com>
> Sent: Sunday, March 24, 2002 9:15 PM
> Subject: IPX Eigrp with static SAP
>
>
> > Hi folks
> >
> > I have following topology.
> >
> > wg1r3
> > --
> > | |
> > --
> > * ptmp *
> > S1/0
> > wg1r2 * * wg1r4
> > -- --
> > | | ----------Ethernet------------| |
> > -- --
> >
> >
> > I create 2 static saps on wg1r4, the saps are advertised by
> ipx eigrp
> > to wg1r3 but r3 dont advertide it to wg1r2 does somebody know wy?
> > Split-horizon is disabled.
> >
> > One other problem, i dont receive saps over the ethernet link on
> > wg1r2....
> >
> > Thaks for your help
> >
> > Louis
> >
> >
> >
> > wg1r3#sh run
> > Building configuration...
> >
> > Current configuration:
> > !
> > version 12.0
> > service timestamps debug uptime
> > service timestamps log uptime
> > no service password-encryption
> > !
> > hostname wg1r3
> > !
> > logging buffered 4096 debugging
> > !
> > username wg1r5 password 0 cisco
> > username sunrise password 0 freesurf
> > ip subnet-zero
> > no ip domain-lookup
> > ipx routing 0000.0000.0003
> > isdn switch-type basic-net3
> > !
> > interface Ethernet0/0
> > description VLAN A (100)
> > ip address 129.45.80.49 255.255.255.252
> > no ip directed-broadcast
> > ipx network 2F
> > !
> > interface Serial0/0
> > no ip address
> > no ip directed-broadcast
> > !
> > interface BRI0/0
> > description ISDN Access 6172
> > ip address 129.45.80.97 255.255.255.248
> > no ip directed-broadcast
> > encapsulation ppp
> > dialer idle-timeout 2000
> > dialer map ip 129.45.80.10 name wg1r5 broadcast 6173
> > dialer map ipx B.0000.0000.0005 name wg1r5 broadcast 6173
> > dialer-group 1 ipx network B
> > isdn switch-type basic-net3
> > ppp authentication chap pap callin
> > !
> >
> > !
> > interface Serial1/0
> > description Link to R2 , R4
> > bandwidth 128
> > ip address 129.45.80.25 255.255.255.248
> > no ip directed-broadcast
> > encapsulation frame-relay
> > ip ospf message-digest-key 1 md5 cisco
> > ip ospf network non-broadcast
> > ip ospf priority 255
> > logging event subif-link-status
> > logging event dlci-status-change
> > ipx network C
> > no ipx split-horizon eigrp 1
> > frame-relay map ipx C.0000.0000.0002 120 broadcast
> frame-relay map
> > ipx C.0000.0000.0004 140 broadcast frame-relay map ip 129.45.80.26
> > 120 broadcast frame-relay map ip 129.45.80.27 140 broadcast
> > !
> > interface Serial1/0.150 point-to-point
> > description Link to R5
> > bandwidth 128
> > ip address 129.45.80.65 255.255.255.248
> > no ip directed-broadcast
> > ipx network A
> > frame-relay interface-dlci 150
> > !
> >
> > router ospf 1
> > router-id 129.45.80.1
> > area 1 authentication message-digest
> > area 3 stub no-summary
> > redistribute igrp 1 metric 5000 subnets
> > network 129.45.80.24 0.0.0.7 area 1
> > network 129.45.80.48 0.0.0.3 area 3
> > neighbor 129.45.80.27 priority 1
> > neighbor 129.45.80.26 priority 1
> > !
> > router igrp 1
> > timers basic 5 15 25 50 200
> > redistribute ospf 1 metric 128 2000 200 200 1500
> passive-interface
> > Ethernet0/0 passive-interface Serial1/0
> > network 129.45.0.0
> > !
> > ip classless
> > !
> > !
> > !
> > !
> > ipx router eigrp 1
> > network C
> > network B
> > network A
> > network 2F
> > log-neighbor-changes
> > !
> > !
> > !
> > !
> >
> > wg1r4>en
> > wg1r4#sh ipx ser
> > Codes: S - Static, P - Periodic, E - EIGRP, N - NLSP, H -
> Holddown, +
> > = detail U - Per-user static
> > 1 Total IPX Servers
> >
> > Table ordering is based on routing and server info
> >
> > Type Name Net Address Port
> Route Hops
> > Itf
> > S 4 server E2.00c0.c769.2081:0451
> conn 1
> > To0/0
> > wg1r4#
> > wg1r4#
> > wg1r4#
> > wg1r4#
> > wg1r4#
> > wg1r4#
> > wg1r4#sh run
> > Building configuration...
> >
> > Current configuration : 1804 bytes
> > !
> > version 12.2
> > service timestamps debug uptime
> > service timestamps log uptime
> > no service password-encryption
> > !
> > hostname wg1r4
> > !
> > !
> > ip subnet-zero
> > !
> > !
> > no ip domain-lookup
> > !
> > ipx routing 0000.0000.0004
> >
> > interface Ethernet0/0
> > ip address 129.45.80.34 255.255.255.248
> > half-duplex
> > ipx network F
> > standby timers 1 2
> > standby preempt
> > standby 1 ip 129.45.80.35
> > standby 1 timers 1 3
> > standby 1 priority 150
> > standby 1 preempt
> > !
> > interface Serial0/0
> > bandwidth 128
> > ip address 129.45.80.27 255.255.255.248
> > encapsulation frame-relay
> > ip ospf message-digest-key 1 md5 cisco
> > no ip mroute-cache
> > logging event subif-link-status
> > logging event dlci-status-change
> > ipx network C
> > frame-relay map ipx C.0000.0000.0002 40 broadcast frame-relay map
> > ipx C.0000.0000.0003 40 broadcast frame-relay map ip
> 129.45.80.25 40
> > broadcast frame-relay map ip 129.45.80.26 40 broadcast
> > frame-relay lmi-type cisco
> > !
> > interface TokenRing0/0
> > ip address 129.45.80.41 255.255.255.248
> > ipx network E2
> > ring-speed 16
> > !
> > router eigrp 1
> > network 129.45.80.40 0.0.0.7
> > no auto-summary
> > no eigrp log-neighbor-changes
> > !
> > router ospf 1
> > router-id 129.45.80.27
> > log-adjacency-changes
> > area 1 authentication message-digest
> > network 129.45.80.24 0.0.0.7 area 1
> > network 129.45.80.32 0.0.0.7 area 0
> > neighbor 129.45.80.25 priority 255
> > !
> > router bgp 5
> > no synchronization
> > bgp log-neighbor-changes
> > neighbor 129.45.80.33 remote-as 5
> > no auto-summary
> > !
> > ip classless
> > ip http server
> > ip pim bidir-enable
> > !
> > !
> > !
> > !
> > ipx router eigrp 1
> > network F
> > network E2
> > network C
> > log-neighbor-changes
> > !
> > !
> > ipx sap 4 server E2.00c0.c769.2081 451 1
> > !
> > !
> >
> >
> >
> >
> >
> > wg1r2#sh ipx ser
> > wg1r2#
> > wg1r2#
> > wg1r2#
> > wg1r2#sh run
> > Building configuration...
> >
> > Current configuration : 2493 bytes
> > !
> > version 12.2
> > service timestamps debug uptime
> > service timestamps log uptime
> > no service password-encryption
> > !
> > hostname wg1r2
> > !
> > boot system flash:2:c3640-js-mz.122-7b.bin
> > logging buffered 4096 debugging
> > !
> > username all
> > memory-size iomem 25
> > ip subnet-zero
> > !
> > !
> > no ip domain-lookup
> > !
> > ipx routing 0000.0000.0002
> >
> >
> > partition flash 2 16 16
> > !
> >
> > !
> > interface Ethernet0/1
> > description VLAN B (101)
> > ip address 129.45.80.1 255.255.255.248
> > half-duplex
> > ipx network D
> > !
> > interface Ethernet2/0
> > description Link to R4 area 0
> > ip address 129.45.80.33 255.255.255.248
> > half-duplex
> > ipx network F
> > standby timers 1 2
> > standby 1 ip 129.45.80.35
> > standby 1 timers 1 3
> > standby 1 priority 120
> > standby 1 preempt
> > !
> > interface Serial2/0
> > ip address 129.45.80.26 255.255.255.248
> > encapsulation frame-relay
> > ip ospf message-digest-key 1 md5 cisco
> > ip ospf network non-broadcast
> > ipx network C
> > frame-relay map ipx C.0000.0000.0003 20 broadcast frame-relay map
> > ipx C.0000.0000.0004 20 broadcast frame-relay map ip
> 129.45.80.25 20
> > broadcast frame-relay map ip 129.45.80.27 20 broadcast
> > !
> >
> > !
> > interface Serial2/1
> > bandwidth 128
> > ip address 129.45.80.57 255.255.255.248
> > ipx network E
> > clockrate 125000
> > !
> > router eigrp 1
> > redistribute ospf 1 metric 128 2000 200 200 1500
> > network 129.45.80.40 0.0.0.7
> > network 129.45.80.56 0.0.0.3
> > distance eigrp 200 200
> > no auto-summary
> > eigrp log-neighbor-changes
> > !
> > router ospf 1
> > router-id 129.45.80.26
> > log-adjacency-changes
> > area 1 authentication message-digest
> > redistribute eigrp 1 metric 5000 subnets
> > network 129.45.80.0 0.0.0.7 area 2
> > network 129.45.80.24 0.0.0.7 area 1
> > network 129.45.80.32 0.0.0.7 area 0
> > neighbor 129.45.80.25 priority 255
> > !
> > router bgp 5
> > no synchronization
> > bgp log-neighbor-changes
> > neighbor 129.45.80.34 remote-as 5
> > neighbor 129.45.80.34 route-reflector-client
> > neighbor 129.45.80.66 remote-as 5
> > no auto-summary
> > !
> > ip classless
> > no ip http server
> > ip pim bidir-enable
> > !
> > access-list 50 permit 129.45.80.25
> > !
> > !
> > !
> > ipx router eigrp 1
> > network C
> > network D
> > network E
> > network F
> > log-neighbor-changes
> > !
> > !
> > no ipx router rip
> > !
> >
> >
> >
> > wg1r2#
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:20 GMT-3