From: Perminder Grewal (percy_gunner@xxxxxxxxxxx)
Date: Fri Mar 22 2002 - 07:02:20 GMT-3
Mammor
I've cut and pasted a basic config from my LS1010 basically you have to put
in the config on only one of the atm interfaces, not like frame-relay.
This config is switching vpi/vci 0/100 and 0/101
Regards
Percy
LS1010#sh run
Building configuration...
Current configuration:
!
version 11.2
no service pad
no service udp-small-servers
no service tcp-small-servers
!
hostname LS1010
!
!
!
atm address 47.0091.8100.0000.0010.11bb.9501.0010.11bb.9501.00
atm router pnni
node 1 level 56 lowest
redistribute atm-static
!
!
interface ATM0/0/0
!
interface ATM0/0/1
atm pvc 0 100 interface ATM0/0/0 0 101
!
interface ATM0/0/2
!
interface ATM0/0/3
!
interface ATM2/0/0
no ip address
atm maxvp-number 0
!
interface Ethernet2/0/0
ip address 150.50.6.254 255.255.255.128
!
no ip classless
!
line con 0
line aux 0
line vty 0 4
login
!
end
LS1010#
>From: "Ahmed Mamoor Amimi" <mamoor@ieee.org>
>Reply-To: "Ahmed Mamoor Amimi" <mamoor@ieee.org>
>To: <ccielab@groupstudy.com>
>Subject: atm pvc
>Date: Fri, 22 Mar 2002 13:31:12 +0500
>
>do we need any maping in the ls1010 when making a pvc on routers.
>
>eg :
> router1-----ls1010-----router2
>
>what will be the minimum config with pvc.
>
>I am trying to make this work with pvc but no help .
>
>
>do we need any route like in frame-swtich on ls1010 or the default config
>will
>work...
>
>also do the ls1010 support cdp .... i cant see it on cdp neighbour
>
>
>-Mamoor
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:17 GMT-3