From: Brian Lodwick (xpranax@xxxxxxxxxxx)
Date: Fri Mar 22 2002 - 13:51:53 GMT-3
Caslow's book pg. 261 shows an example of a PVC configuration on a
LightStream 1010.
Here is what he shows as an example:
interface ATM1/1/2
no keepalive
atm pvc 1 140 interface ATM1/1/1 0 140
atm pvc 1 60 interface ATM1/1/1 0 60
I would think you would have to reflect this on the other interface
ATM1/1/1, but I don't know for sure I've never done it. I'm using a Fore
systems switch.
>>>Brian
>From: "Ahmed Mamoor Amimi" <mamoor@ieee.org>
>Reply-To: "Ahmed Mamoor Amimi" <mamoor@ieee.org>
>To: <ccielab@groupstudy.com>
>Subject: atm pvc
>Date: Fri, 22 Mar 2002 13:31:12 +0500
>
>do we need any maping in the ls1010 when making a pvc on routers.
>
>eg :
> router1-----ls1010-----router2
>
>what will be the minimum config with pvc.
>
>I am trying to make this work with pvc but no help .
>
>
>do we need any route like in frame-swtich on ls1010 or the default config
>will
>work...
>
>also do the ls1010 support cdp .... i cant see it on cdp neighbour
>
>
>-Mamoor
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:17 GMT-3