From: RSiddappa@xxxxxxxxxx
Date: Thu Mar 21 2002 - 06:23:15 GMT-3
Can I use this set and use the aux port as serial.
Ia m tryed all the config the port does nto come up.
It is just dead.
R.
-----Original Message-----
From: Ahmed Mamoor Amimi [mailto:mamoor@ieee.org]
Sent: Saturday, February 23, 2002 10:53 PM
To: yakoout; ccielab@groupstudy.com
Subject: Re: AUX-AUX Back to back no modems
I havent heard of anyway to do DDR on AUX without modem.... u have to nail
down the link in order to do routing
without modem..... please let me know if u find anything that ur desiring i
will be interested.
-Mamoor
----- Original Message -----
From: yakoout <yesmat@iprimus.com.au>
To: Ahmed Mamoor Amimi <mamoor@ieee.org>; <ccielab@groupstudy.com>
Sent: Sunday, February 24, 2002 9:40 AM
Subject: RE: AUX-AUX Back to back no modems
> Ahmed,
>
> Thanks mate for the input. But I am not looking for just back-back
> connection. I want to be able to dial out from one router to the other
(dial
> in demand).
>
> The link provided talks about just back-back permanent connection. I need
> dial up connection.
>
> Example, I want to use this aux dial up connection as backup to other
> interfaces (to simulate ISDN BRI links), which means that AUX under normal
> circumstances is down but will DIAL remote end if primary serial goes
down.
>
> thanks
>
> -----Original Message-----
> From: Ahmed Mamoor Amimi [mailto:mamoor@ieee.org]
> Sent: Sunday, February 24, 2002 2:50 PM
> To: yakoout; ccielab@groupstudy.com
> Subject: Re: AUX-AUX Back to back no modems
>
>
> Please have a look at :
> http://www.cisco.com/warp/public/793/access_dial/auxback.html
>
> But ur roll over will not do the trick. for this u need a null modem
cable.
> In this doc. it is written that this is been done with roll-over cable....
> yes this right as null-modem cable is also roll-over but with different
pin
> connections.
> RxD 2 3 TXD
> TxD 3 2 RxD
> CTS 4 5 RTS
> RTS 5 4 CTS
> DTR 6 20 CD
> CD 20 6 DTR
> GND 7 7 GND
>
>
> -Mamoor
>
>
> ----- Original Message -----
> From: yakoout <yesmat@iprimus.com.au>
> To: <ccielab@groupstudy.com>
> Sent: Sunday, February 24, 2002 8:12 AM
> Subject: AUX-AUX Back to back no modems
>
>
> > Hi all,
> >
> > I am looking for config or pointers on conecting two 2500 routers VIA
> > AUX-AUX ports Back to back using rollover cable for ISDN dialup
practice,
> > without the use of any modems. I am not sure if that is doable or not.
> >
> > Your help is appreciated
> >
> > Yakout
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:15 GMT-3