From: Chuck Mason (romason0916@xxxxxxxxxxx)
Date: Thu Mar 21 2002 - 01:52:05 GMT-3
Shadi,
You need no keepalive on both sides of the link and
clocking.
Here is an example:
interface Serial1
ip address 140.4.46.4 255.255.255.224
no ip directed-broadcast
encapsulation frame-relay
logging event subif-link-status
logging event dlci-status-change
no keepalive
clockrate 125000
frame-relay map ip 140.4.46.6 104 broadcast
http://www.cisco.com/warp/public/125/frbacktoback.html
HTH,
cm
-----Original Message-----
From: nobody@groupstudy.com
[mailto:nobody@groupstudy.com]On Behalf Of
Shadi
Sent: Thursday, March 21, 2002 12:26 AM
To: ccielab
Subject: Frame-relay back to back
Hi all,
Is there a way to connect two router back to back
without the need of
frame-relay switch?
if there, please provide me with the minimal
configuration on how to make it
work?
Shadi
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:15 GMT-3