From: Bhisham Bajaj (bhishambajaj@xxxxxxxxx)
Date: Thu Mar 21 2002 - 00:36:44 GMT-3
can u show us the config of the two isdn routers
bb
--- Carl Phelan <carlphelan@hotmail.com> wrote:
> Hi All,
>
> I have a bit of a problem, I have configured an OSPF
> demand circuit over
> ISDN that just will not stop coming up even with the
> inclusion of the
> command 'no peer neigbor-route'. The ISDN circuit
> is in OSPF area 0 as
> are both attached routers.
>
> I thought initially it may be IGRP being
> redistributed into OSPF causing
> a change in its status but I have blocked incoming
> IGRP routes by
> setting a 'passive interface' on the sending router
> with no luck. 'Show
> dialer' reveals the reason for dialing as
> '255.255.255.255' - a
> broadcast. The interfaces are both point to point
> in OSPF however and
> not broadcast.
>
> Thanks for your advice.
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:15 GMT-3