From: MADMAN (dmadlan@xxxxxxxxx)
Date: Wed Mar 20 2002 - 13:21:54 GMT-3
http://www.cisco.com/univercd/cc/td/doc/product/access/acs_fix/cis2500/2501/250
0ug/maint.htm
the two simms are flash and the single simm is main memory
Dave
Todd Carswell wrote:
>
> Hi all,
>
> A while back, I shared with the group that one of my routers will not boot
> properly. It keeps spitting out the following error message over and over...
>
> System Bootstrap, Version 11.0(10c), SOFTWARE
> Copyright (c) 1986-1996 by cisco Systems
> 2500 processor with 14336 Kbytes of main memory
> Local Timeout (control reg=0x118) Error, address: 0x21000F2 at 0x1076914 (PC)
>
> I've learned that my problem could be solved by replacing the memory in the
> router. Here are 2 questions for the group...
>
> 1. Which memory chips should I replace? Is it the 2 chips over on one side
> of the motherboard or the single, "beefier" chip all by itself on the other
> side of the board. (I don't know how to refer to them.)
>
> 2. Where can I purchase the memory I need and what type of memory should I
> buy? I understand that I can use off-the-shelf memory, but what brand is
> best?
>
> Thanks!
>
> Todd Carswell
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:14 GMT-3