From: armreg@xxxxxxxxxxxx
Date: Tue Mar 19 2002 - 16:41:42 GMT-3
Guys,
I added the authentication and I still do not see the route in R3.
Thanks
Antonio
Khan Munib <Munib.Khan@icl.com> wrote:
>As you are using authentication, you must add the authentication string
>after the virtual link command also.
>
>e.g. area 1 virtual-link 140.4.2.1 message-digest-key 1 md5 cisco.
>
>Dont forget this has to be done on both sides of the virtual link. R2 and
>R3. Let me know if that helps.
>
>-----Original Message-----
>From: armreg@netscape.net [mailto:armreg@netscape.net]
>Sent: 19 March 2002 16:42
>To: ccielab@groupstudy.com
>Subject: OSPF network - area 20 Question
>
>
>Hello Folks:
>
>Here is the diagram of the network
>
>
> AREA 0 L0 Area 0
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:13 GMT-3