From: Lab Candidate (labccie@xxxxxxxxx)
Date: Sun Mar 17 2002 - 21:20:51 GMT-3
Jim,
Long time no see.....how are y'doning? where've you been?
I'm assuming they are refereeing to the source route bridge command
(source-bridge explorer-maxrate). This determines how many explorer frames
per second are allowed? I guessing the question actually said "accept no
more than 100 frames."
If not, maybe the question meant to increase the queue for explorer packets
in which case the command at the bottom (source-bridge explorerq-depth)
would apply
I would be interested in the exact verbage of the question.
The links reference a local copy of the Documentation CD. Change the
loopback address to www.cisco.com for lookup over the web.
http://127.0.0.1:8080/cc/td/doc/product/software/ios121/121cgcr/ibm_r/brprt1
/br1dsrb.htm#xtocid112158
source-bridge explorer-maxrate
To set the maximum byte rate of explorers per ring, use the source-bridge
explorer-maxrate global configuration command. To reset the default rate,
use the no form of this command.
source-bridge explorer-maxrate maxrate
no source-bridge explorer-maxrate maxrate
Syntax Description maxrate
Number in the range 100 to 1000000000 (in bytes per second). The default
maximum byte rate is 38400 bytes per second.
http://127.0.0.1:8080/cc/td/doc/product/software/ios121/121cgcr/ibm_r/brprt1
/br1dsrb.htm#xtocid112159
source-bridge explorerq-depth
To set the maximum explorer queue depth, use the source-bridge
explorerq-depth global configuration command. To reset the default value,
use the no form of this command.
source-bridge explorerq-depth depth
no source-bridge explorerq-depth depth
Syntax Description depth
The maximum number of incoming packets. The valid range is 1 to 500.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:11 GMT-3