Re: r routes in BGP table

From: Manny Gonzalez (gonzalu@xxxxxxx)
Date: Sun Mar 17 2002 - 16:57:20 GMT-3


   
Can you do a

sh ip bgp 203.250.15.2

or any route that has the "r" ?? This may give you more insight as to
the atributes in the prefix

ying chang wrote:
>
> Hi Michael,
>
> Do you mind to post your configs? What's in your AS300? It appears on every
> line that includes 'r'. I'm intersted to see what might cause it, as I've
> never seen 'r' before.
>
> Thanks,
> Chang
> >From: "Michael Jia" <mjia@cisco.com>
> >Reply-To: "Michael Jia" <mjia@cisco.com>
> >To: "Ccielab@Groupstudy. Com" <ccielab@groupstudy.com>
> >Subject: RE: r routes in BGP table
> >Date: Sat, 16 Mar 2002 21:08:56 -0800
> >
> >Hi,
> >
> >No. It is not from a production router.
> >The routes are generated in the lab router.
> >It always stay in "r" even after reboot the router.
> >Those r routes are learned via iBGP and exists in the routing table via
> >EBGP -> OSPF redistribution at one of the EBGP routers within the same AS.
> >
> >
> >Thanks
> >Michael
> >
> > > -----Original Message-----
> > > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> > > Ahmed Mamoor Amimi
> > > Sent: Saturday, March 16, 2002 8:14 PM
> > > To: Michael Jia; Ccielab@Groupstudy. Com
> > > Subject: Re: r routes in BGP table
> > >
> > >
> > > is this from a production router
> > >
> > > -Mamoor
> > >
> > > ----- Original Message -----
> > > From: Michael Jia <mjia@cisco.com>
> > > To: Ccielab@Groupstudy. Com <ccielab@groupstudy.com>
> > > Sent: Sunday, March 17, 2002 7:26 AM
> > > Subject: r routes in BGP table
> > >
> > >
> > > > Hi,
> > > >
> > > > Would someone briefly explain what is the "r" on the left of the bgp
> > > routes.
> > > > What caused this to happen and how to fix it.
> > > >
> > > > The following is the output of "show ip bgp".
> > > >
> > > > Thanks
> > > > Michael
> > > >
> > > > ===================================
> > > > cisco2600#sh ip bgp
> > > > BGP table version is 7, local router ID is 203.250.13.41
> > > > Status codes: s suppressed, d damped, h history, * valid, > best, i -
> > > > internal,
> > > > r RIB-failure
> > > > Origin codes: i - IGP, e - EGP, ? - incomplete
> > > >
> > > > Network Next Hop Metric LocPrf Weight Path
> > > > *> 128.213.63.128/25
> > > > 128.213.63.2 0 0 200 i
> > > > * i 203.250.15.2 100 0 300 500
> >400
> > > 200
> > > > i
> > > > r 192.208.10.128/25
> > > > 128.213.63.2 0 200 400
> >500
> > > 300
> > > > i
> > > > r>i 203.250.15.2 0 100 0 300 i
> > > > r 195.211.10.128/25
> > > > 128.213.63.2 0
> > > 200 400 500 i
> > > > r>i 203.250.15.2 100 0 300 500 i
> > > > *> 200.200.10.0 128.213.63.2 0 200 400 i
> > > > * i 203.250.15.2 100 0
> > > 300 500 400 i
> > > > cisco2600#



This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:11 GMT-3